Piasini Tune...where do I get this?

[MSMS3]

logs and stuff are on other forum i have my tune and I couldnt be happeir nypest is making 285whp and 315 torq with sri, tmic, and flash show my other car that is making that much power with only 2 mods guys that are fully bolted with ap are mkaing less ,and yes he is not using dyno jet.....and yes it helps to keep open throttle plate till redline

Post them here. We want to evaluate them as a group. There are open throttle to redline fixes with other products. That does not, IMHO, change the inherent limitations of the stock turbo, or increase usable power, as dyno runs on those WOT mods have shown. Show us something we can get our teeth into.

More importantly, we will want to see this tune placed on a well-respected member's car with before and after dyno runs from a dyno being used by other members of this group, and we want to see full data logging. Standback and AP have done that and valid comparisons can be made, benefits and limitations compared. Otherwise, it's just talk and lacks credibility.

I'm betting that claims are exaggerated and not repeatable on MS3's owned by regular members of this group. Show us we are wrong or simply fade away. Do these things, do the well, and we will love you and respond with the $$$.

Product vendors have too be prepared to put up or -- well you know the rest.

 

[MSMS3]

I was going to a dyno day last saturday but instead i went to my fiances sister wedding you can feel diff after flash when driving......I will do dyno as soon as i install dp and show comparsion same dyno that i went before....I was going to do dyno with the same mods and flash but i instaled fmic and i dont want to take it off and instal again..... best way to reach him is to call him....they thing is that piasini flash is not advertized at all...lokk for first threads when they didnt have gus n us and you ahd to sen ecu to itly they showed dyno graphs they gained around 30hp over stock...to each his own

Question: Are you still beating the s*** out of modded Sti's (300 whp) from a dig while shifting at 7,000 rpm in your lightly modded Pisiani tuned MS3, as you declared in another thread here?

 

[wisniaPl]

Question: Are you still beating the s*** out of modded Sti's (300 whp) from a dig while shifting at 7,000 rpm in your lightly modded Pisiani tuned MS3, as you declared in another thread here?

yes and not 7k rpm but till redline around 6,800 when i was shifting at 5,5k car had power but it was losing top end so that when sti was passing me bye, and it wasnt from a dig!! read carefully i never stated that you just trying to make me look stupid thats why i dont come to this forum to often its full of (stfu).... I will do vids next time have talk to Phil(sti owner) to make new race..... my car is not mild tuned thx to nypes i got the most agresive tune from all people that he sold it to i dont have rev limiter and my bost is set higher as other people had too and other things are switched around....Im local so if i need something i have 10 mins to meet him. I have tune that he was testing on his car.....dont fell like searching post about piasini almost from 8months ago that they show stock and after flash dyno.... im not selling it!! Iwill post my dyno charts after dp and meth instal .... and before with mods that i have now..... but till then i have to save some money ...college life

 

[240ka]

Question: Are you still beating the s*** out of modded Sti's (300 whp) from a dig while shifting at 7,000 rpm in your lightly modded Pisiani tuned MS3, as you declared in another thread here?

nypest if i remember correctly said that.

 

[wisniaPl]

an only bolt on im missing are dp and meth(which are in my room next to me ready to instal) so propably more likely medium moded(spank)
I will try to get logs and dyno chart from nypest...Im not gona win with crowd 1 (me)vs many more you want to and you are local hit me up I will be happy to demonstrate you how car feels after tune ,come for test drive

 

[Cue]

Iwill post my dyno charts after dp and meth instal .... and before with mods that i have now..... but till then i have to save some money ...college life

There's always some reason to buy more time... always... The Piasini tune has lost all credibility for me. I'm sure eventually, eventually,this tune will be good and what everyone wants... but please don't say "I told you so" when it finally does... cause there's no way in hell it's ready now.... I'm callin' bulls*** as well....

 

[wisniaPl]

There's always some reason to buy more time... always... The Piasini tune has lost all credibility for me. I'm sure eventually, eventually,this tune will be good and what everyone wants... but please don't say "I told you so" when it finally does... cause there's no way in hell it's ready now.... I'm callin' bulls*** as well....

no buying time i just dont have money i rather save that 70 on my dp instal than go to dyno as i said fell free to come around and test drive my car

 

[wisniaPl]

old data log that i found ...I believe that Nypest did it but im not sure that it was his or one of the customers cars...it was on other forum ...this forum sucks cant even post links to other sites.....

 

[Cue]

old data log that i found ...I believe that Nypest did it but im not sure that it was his or one of the customers cars...it was on other forum ...this forum sucks cant even post links to other sites.....

... couple comments...

- of course another '1 gear log'...
- looks as though you pulled this one gear in a matter of 100 seconds??!?!
- 'rpm' is highlited on the left, and 79.8 is highlited on the right... with no cursor

is this photoshopped???

Here's my log with a standback... no boost cause my CX7 is map clamped and won't show accurate boost through the ODBII port (Dashhawk)

Times match at the bottom, and I'm showing all 4 gears....

ANYONE ELSE WANT ANY OTHER LOGS WITH THE STANDBACK, I AM MORE THAN WILLING TO PROVIDE. NAME WHAT YOU WANT TO SEE, I WILL PROVIDE. I DON'T HAVE DP AND WON'T WAIT TO LOG MORE STUFF FOR YOU AND I WILL STILL PROVIDE.... (Fully bolted CX-7 (no downpipe) with CP-E Standback)

Now why can't Piasini give anything more than your 1 gear log that took you 100 seconds to run???

 

[Cue]

Your move wisniaPI... Prove us all wrong!!

 

[wisniaPl]

this og was done at the dyno when he got 284 whpa and 302wtq copy of the post

"Went back to the dyno yesterday since the temp was very similar to the first dyno day had the car leaned out a little more

284WHP /302TQ

same mods same dyno"( hks sri, autoexe tmic, speedy inlet, mazdaspeed cbe)
same dyno that darksun was using

as i said cant wi with people that are sceptic......

 

[Cue]

Compare the Piasini log with my Standback log (page 2)... the top and bottom timeline should match up, his don't... this has to be a photoshop job on the piasini log.... someone please correct me if im wrong!!

 

[wisniaPl]

Compare the Piasini log with my Standback log (page 2)... the top and bottom timeline should match up, his don't... this has to be a photoshop job on the piasini log.... someone please correct me if im wrong!!

why he would phototshop log?? wtf(rofl)

 

[derspi]

^^

Yeah, photoshopping a dyno pull would be quite pathetic but then so is showing a dyno log of a 1-gear pull...(not meant to poke at you bcoz you're just the messenger)

 

[Cue]

^^

Yeah, photoshopping a dyno pull would be quite pathetic but then so is showing a dyno log of a 1-gear pull...(not meant to poke at you bcoz you're just the messenger)

Honestly.... something, a couple things, don't look right with the log...

 

[wisniaPl]

Honestly.... something, a couple things, don't look right with the log...

w
seriously get a live you trying to prove ho SB is awesome because you using one...same here and same with cobb users....

 

[240ka]

Compare the Piasini log with my Standback log (page 2)... the top and bottom timeline should match up, his don't... this has to be a photoshop job on the piasini log.... someone please correct me if im wrong!!

dude, you cant be serious. a photoshopped log?

this is the reason why im considering the tune over the AP.

less mods and tune, equaling as moch or more power than the next car running AP and more bolt ons.

only thing im worried about is shipping my ECU and getting it back in one piece. especially with NYpest not being on often

 

[Cue]

I ain't trying to hype the standback over anything just cause I got it. I've said this before and in other forums... if I can see some actual satisfying data, which has yet to happen from many request of a lot of people, I'd totally consider it and support it... same with the Cobb... even with mixed reviews on the Cobb, many being positive, there some actual satisfying data with many users... why can't Piasini deliver this??

 

[240ka]

because of the amount of users or lack of

people tend to go with trends. and i know a few people who think that everything cobb, hks or whoever, makes is the best whatever when its not so. b/c they are basing it off of their name

just because its not popular doesnt mean anything

its alot about how much or how lilttle research someone puts into something.

i love cobb and think they are great but i would rather a tune over a AP

 

[wisniaPl]

I ain't trying to hype the standback over anything just cause I got it. I've said this before and in other forums... if I can see some actual satisfying data, which has yet to happen from many request of a lot of people, I'd totally consider it and support it... same with the Cobb... even with mixed reviews on the Cobb, many being positive, there some actual satisfying data with many users... why can't Piasini deliver this??

thye had everything , dyno charts, logs etc when they first introduced flash...as I said i dont feel like searching a post from almost 1year ago....ob both forums