New Info! APEX Motorsports D/P!

[ForceFed]

Aight' guy's ,as promised,here is the new info.......

There is a new price and availability on this D/P and "ALL" required hardware to install it!
NO CEL INCLUDED!
The new price for the D/P is $299+shipping!

This 2.5" D/P now only comes thermal coated,with the new rear gasket,new rear bolts and nuts,and an O2 modifier with instructions for installing it!

This pipe wil bolt up to the stock exhaust with no modifications for those of you who do not plan on changing the cat back section!

I still beleive that this is an excellent price for the quality of pipe you get.It is one of the nicest pieces I have ever purchased either aftermarket or custom!The fitment is of the highest quality and is a simple bolt on procedure.

I beleive is is an excellent "bang for the buck " item!

If you would like to purchase one of these pipes for your MSP,I am listing the contact info below.

Apex Motorsports of Tempe
(480)967-6515
e-mail apexcivic@aol.com

Speak with Ben (tell him I sent you(Matt)

For the guy's who already purchased a D/P,and want to get the O2 modifier,PM me as I will give you the required info on that.Ben has worked out a deal and I will fill you in with what you need to do!

Anyone who has any questions,please feel free to PM me and I will do my best to answer all of your questions!
If you feel you are ready to order your D/P,then give Ben a call and order away!(tell him I sent you though!)

Once again,I am very picky on my parts selection,and I give this mod an absolute two thumbs up!I gaurantee(SP?) you will not be disappointed!

Happy boostin',Matt

 

[LinuxRacr]

Hey, that O2 modifier should work on a MP3 too, right?

 

[ForceFed]

Hey, that O2 modifier should work on a MP3 too, right?

Yes it should as long as we use the same rear O2 sensor!It is a very easy install.If you call Ben @ Apex,I'm sure he can get one to you very quickly for a reasonable price for the modifier by itself!

Matt

 

[OutDriveU]

cool So you notice better power witth that DP? If so was it really noticeable or just a little.

Thanks

 

[InsidiousMSP]

Check your PM.

 

[mikeeeee]

sorry noob question but it comes with no cat right?
does the cat go after or on the d/p?

 

[ForceFed]

cool So you notice better power witth that DP? If so was it really noticeable or just a little.

Thanks

This made a mild power increase and added a slightly deeper exhaust note.It definately was noticable as soon as I got in to drive it!The mild increase in power is just the beginning of a nice set-up.Couple this pipe with a full 2.5'' exhaust,intake and boost controller and you will be driving a whole new car!
Matt

 

[murdock_]

dyno?

 

[orng_mazdaspeed]

is this a no cat down pipe??

 

[JDM Sam]

why dont yall wait for the 3 inch dpipe with 3 inch cat that im getting made. with stock o2 bung and just like the stock has a bung for a wideband. courtesy of CTC and my MSP. Also 3 inch cat back with Apexi N1 Turbo 3 inch muffler.

 

[orng_mazdaspeed]

does anyone know of any one making a 3" turbo back without cats that will work and not set off CEL??

 

[boostisgood]

Orng_mazdaspeed, If there is NO cats, and NO O2 mdifier, you WILL throw a CEL. That is the way of ODBII cars my young padawan.

 

[orng_mazdaspeed]

so then how much difference do you think a 3'' cat versus no cats would be??

 

[ForceFed]

dyno?

This is an old D/P ,The first that I know of being produced.Search the old threads on D/P from about 6-8 weeks ago( or more)and you will see all the info.It did however produce apprx, 11HP at the wheels on the original car on the dyno! And yes I beleive those numbers after I put it on my car!You can feel it.
Matt

 

[apexcivic]

We have thought about doing the 3" DP but we worry about clearance on the turbo side with the 3" pipe , the 2.5" is a tight fit already.... on our test car the DP produced 10-12 hp to the wheel from 3000 rpm+
we are working on making the new "s" pipe assy. from the turbo to DP which we feel it will produce more power for your car than the 3" exhaust system.
We also have the injen RD intakes for MSP for $220
thanks
Ben

 

[Jan]

is there a website for al of this?
i mean for the products..
coz i live in canada and i would be interested if i find the pricing reasonable..

 

[apexcivic]

you can call me at 480-967-6515 with any questions or order off the website www.apexr1.com
thanks

 

[YuYuRena]

Has any1 of you done a pressure check to see how much of the back pressure is produced by the dp??? I would like to know specifically # and test parameters.