mr.Speed Sc kit for the FS

[Ddrop]

Hey this ones been floating around the probetalk community. Since we have the same engine, i thought i share it with the protege community.
Also they mention about him selling a megasquirt kit for the 2.0 with this.
Id be instrested in a preprogramed megasquirt alone.


http://forums.probetalk.com/showthread.php?t=1701180448

 

[vindication]

what type of supercharger is that?

 

[xelderx]

It looks like it's going to be a close fit wih the exhaust runners. I'd lke to see a picture of it with headers installed.

 

[zerocover]

I would totally go for the megasquirt.We can only use that for fuel right now right, the coil packs are hard to work apparently.

 

[capnsavem]

"Mr.Speed will soon have its four-cylinder Supercharger kit ready for the public!

From Initial plans and work, the design and application has changed considerably. The kit now utilizes a Clutched Eaton M62 blower, just like our V6 Supercharger kit.

The will come in two versions, intercooled and non - both of which at 7psi of boost.

The non-intercooled kit comes complete with all mounting hardware, intake pipes, couplers, t-bolt clamps, vac wiring, switch for the blower, two blow off valves and instructions. The Intercooled kit has all of those items, plus the intercooler.

An upgraded aluminum crank pulley will be an option, this will allow higher boost levels while keeping the clutched feature of the supercharger. Pulleys are anticipated to come in sizes to compensate for 9psi, 12psi and 15psi."

 

[TampaSport20]

I would totally go for the megasquirt.We can only use that for fuel right now right, the coil packs are hard to work apparently.

no 1.6L love (argh)

did our engine get put in anything but the BJ chassis ????

 

[p5T]

A/C?

It could make a nice addition to my T3 setup...

 

[p5T]

no 1.6L love (argh)

did our engine get put in anything but the BJ chassis ????

Is it a 1.6 BP?
European miata????
Otherwise you'll have learn to weld and DIY...

 

[Ddrop]

I would totally go for the megasquirt.We can only use that for fuel right now right, the coil packs are hard to work apparently.

on the fs02 we actually have to chuck our distributor and use escort coil packs to get the ignition part to work.

http://forums.probetalk.com/showthread.php?t=1701152325&highlight=coil