Mazdaspeed Emblem Question

[EvilMSP]

Recently I got the suggestion from a friend that the rear end of the speed would look sweet without all the logo's on it. He was told (and I am asking to make sure this is true) that is held on by glue only. And that you can just take a hand dryer, heat it up, then use dental floss to take them off easily. Any truth to this?? Any possible hard??

Also is there anyway of taking off the front emblem without buying an entirely new....front bezil? Not sure what to call it.

Thanks

 

[Captain KRM P5]

the Protege logo and mazda "m" logo have small knobs that hold them in as well as the adhesive. removing the logos will leave a pair of exposed holes for both logos

 

[Captain KRM P5]

the front grill, without the emblem in place, has the M shape still cut out of it where the M would fit in.

 

[EvilMSP]

Ah thanks I was afraid it was going to have nubs like that. Any idea about the 23 on the sides of the m?

 

[Dexter]

What 23?

 

[Pmpkinhead]

Open the trunk and look inside the panel. You can see em'

367 (mp3yellow

 

[Dexter]

You can see a 23?

 

[Dexter]

It would help if you would elaborate clearly on whatever the hell you are trying to say...

I think you are asking if there are 2 holes for the rear flying m emblem. If you are, then yes, there are.

 

[Emode]

come on dex, you know, the "23"
where have you been?

 

[Dexter]

hahah oh...oh glorious sarcasm...

 

[EvilMSP]

Lol guys sorry about that I haven't checked this for a while cause no one was posting. All I was saying was the other 2 emblems. My giant finger must have pressed the 3 at the same time, so sorry.

Im just talking about the Protege' and Mazdaspeed symbols. On the left and right of the trunk.

 

[EvilMSP]

It would help if you would elaborate clearly on whatever the hell you are trying to say...

I think you are asking if there are 2 holes for the rear flying m emblem. If you are, then yes, there are.

No I wasnt Dex that question was already answered by the pokemon guy. I was talking about the other ones. Better discription in the post above.

Also if your not down with the 23.......well i just feel sorry for you.

 

[Dexter]

No I wasnt Dex that question was already answered by the pokemon guy. I was talking about the other ones. Better discription in the post above.

Also if your not down with the 23.......well i just feel sorry for you.

Open the trunk and look inside the panel. You can see em'

 

[EvilMSP]

Ah yes that would be a good idea huh (boom02).

I guess I just figured they would be covered up by a plate or something. Ill take a look when I go to work this mourning and find out.

 

[EvilMSP]

Ok I finally got a chance to take a look and here is the info for anyone else that is interested.

The mazda emblem is attached by 2 bolt/washers ,DOH!
The mazdaspeed logo appears to be glue only BUT there are 2 holes behined there i it so can't remove w/o holes, DOH!
The Pretege' is also attached by 2 bolt/washer combo's, DOH!

So WAAAaaa WAAAaaaaaaaa the emblems gotta stay it seems.

 

[Black Majik MSP]

I know I have answered this ? several times before, but I'll show the picture again...

 

[Black Majik MSP]

Ok I finally got a chance to take a look and here is the info for anyone else that is interested.

The mazda emblem is attached by 2 bolt/washers ,DOH!
The mazdaspeed logo appears to be glue only BUT there are 2 holes behined there i it so can't remove w/o holes, DOH!
The Pretege' is also attached by 2 bolt/washer combo's, DOH!

So WAAAaaa WAAAaaaaaaaa the emblems gotta stay it seems.

I could have told you that & I probably already told someone else if you would have searched. It doesn't mean you can't take them off. The holes on my car are barely visible because I put 3M VHB tape over them on the inside of the trunk. Then just use the touch-up paint you got with the car & paint the white tape that you see from the outside of your car. I guarantee that hardly anyone will notice & you'll probably forget too after awhile.

 

[EvilMSP]

Oh I wasn't implying that they could not be taken off, perhaps I should have said a full statement.

I wanted them off with no marks, I dont want a bunch of holes in my trunk, that is the majority of my waa waaaaa.

Im sure they come off very easy...maybe Ill take em off and see how it looks.

 

[EvilMSP]

Now I just gotta find my touchup paint container

 

[Newf]

I could have told you that & I probably already told someone else if you would have searched. It doesn't mean you can't take them off. The holes on my car are barely visible because I put 3M VHB tape over them on the inside of the trunk. Then just use the touch-up paint you got with the car & paint the white tape that you see from the outside of your car. I guarantee that hardly anyone will notice & you'll probably forget too after awhile.

not worried about water eventually getting in the trunk?