Map Clamp not working

[oskinosmee]

My map clamp wont clamp at all. I have it installed as the directions state red to 5v, white to signal and black to ground can someone help me please. BTW this is the one i have

http://cgi.ebay.com/ebaymotors/Dodg...016QQitemZ260217916289QQrdZ1QQsspagenameZWDVW

I used those blue wire connectors also.

 

[tru-boost]

maybe you connected it to the wrong ecu pins..... maybe you didnt turn it down enough....maybe it is a fauly clamp...who knows. you need to give some more details as to what types of things you have tried, what pins you used, what does the volt meter say ?

 

[oskinosmee]

i use the pins in Bravnik"s how to. I tried using the DH like he said but it reads the same as my Boost Gauge. The screw that you turn never seems to stop turning, meaning it will keep turning either way. I didnt use the voltmeter. But i turned it both way and i got nothing

 

[tru-boost]

well you are using the same clamp as me and i can tell you this. that adjuster screw is very sensitive and the stops at each end are so slight, that if you are not goin slow and being gentle you will break right through the stops. if you over spun it to far it is very possible that you damaged it and it will not work. it should not spin freely forever in each direction. i think mine will get like 7 full turns of the screw from stop to stop.