License plate bulb size?

[dmx3118]

I am changing most of the lighting on my p5 to led lights and i am having an issue finding the proper sized bulb for the license plate lights. i was using the sylvania replacement guide, which seems to have been accurate with most of the bulbs but for the license plate light it says it is a 3652 and i cant seem to find that bulb anywhere.

i was going to be ordering the leds from autolumination.com and they dont have the size listed any help would be great.

also the sylvania site list there being a tail light and stop light(if they are the same i assume i am ordering a red bulb due to the lens being red correct) i assume these are the same thing. they do the same for the side marker and parking light or front turning signal and parking light, again i assume they are the same.

 

[CheeseHelmet]

I got mine at the dealer, it was about $1. They'll know exactly what bulb you're tanking about, no part number needed

 

[CTt3P5]

Here ya go.

http://www.sylvania.com/ConsumerProducts/AutomotiveLighting/LampReplacementGuide/AutoLRG-Results.htm

 

[dmx3118]

cheese helmet....i assume that is a stock replacement right? i wanted to do a led replacement

and ctt that link is not working what is it to

 

[CTt3P5]

Weird, it was working earlier. Check out sylvania.com. They have an automotive section that includes a replacement guide for all applicable bulbs. As for LED, just find which one relates to the bulb you want to replace. IIRC the license plate bulb is 3652.

 

[JDMJNKY]

Just put in a 194 bulb fit's fine.I got my white led 194 bulb at pepboy's

 

[itsjbeck]

http://www.ddmtuning.com/Products/194LED-4x3028LED-White

just put these in. can get pics if you would like

 

[dmx3118]

thanks everyone for the help i was thinking 194's would work i just didnt want to buy them and have them not fit

 

[MasonMetcalfe]

the 194's work (i have LEDs too)
but I was able to get the passenger side like socket out, but the drivers side feel like the wire behind it is too short to get the cover off or something. I get it all unclipped from the body but then I can get it far enough out to get the cover out.