Leftover parts (Perrin, 440cc injectors, SSAFC, lugs, stock turbo etc.)

Hey guys, I recently picked up a Mazdaspeed 3 so I will not be needing any of these parts. Of course all prices are OBO but I feel like I have priced them competitively with the going rate for used parts. Thanks for looking.

Subaru WRX Top feed 440cc injectors with new O-rings.
SOLD

Perrin Fuel Rail
Purchased from member and never used. Not 100% but I don't think it has ever been used. Comes with all braided lines needed for installation
SOLD

Turbosmart Manual boost tee (Black)
SOLD

Stock turbo removed because of oil blowby
No shaftplay but I am selling so someone might want to get a new center housing or whatnot
Sold

High quality silicon vacuum lines
enough lines to replace ALL vacuum lines on the MSP. This isn't cheap stuff and never used. I can't remember who I ordered from but I know it was almost $100.
Sold

Signature Sounds snotbox (catch can)
Has AN fittings ready to be installed on your MSP or Protege. Has my username painted on the bottom but you can barely tell
Comes with clamp and bracket to install. has a dent where it was tightened during install
sold

DDM tuning 6k HID kit for MSP. Never used but needs 1 ballast to be complete. Also could be used to replace burned bulbs/ballast
Sold

AWR Engine motor mount inserts
Never used only opened to check parts
SOLD

MSP OEM MAF
Not sure how many miles. Guarenteed to work
Sold


MSP Primary o2 sensor
Not sure how many miles. Guarenteed to work
sold

Corksport Stainless Braided Clutch Line
Never opened
Sold

Muteki SR48 Open ended Neo-Chrome lug nuts 12x1.5
SOLD

Rotary Rasp Red LED under dash kit
Normally used in rx8's but just uses 12 volt power
$30 shipped

Factory shifter and bushing
SOLD

SSAFC with disk and USB cable
I believe it is a Version 2. Maybe someone can help me out with this. I have never used this, was bought from a member here.
SOLD

Vibrant Black Vacuum block
Has all of the pieces to close vac ports
$40 shipped

 

[RicoP5]

ill take clutch line and catch can pmd u

also got pics on how it goes intalled. im used to seing pics of the set up with all 2 3 cans set up from them not just one.

just want to make sure i do it right

 

[boostedmsp]

Paypal request sent.

Here is a pic of how mine was mounted.

It just comes with a clamp and a bracket you can mount wherever you want.

 

[RicoP5]

so one fitting goes to the side of the vc and the other on top where the little valve is at?

 

[boostedmsp]

so one fitting goes to the side of the vc and the other on top where the little valve is at?

Yes. Both ends connected to the block are attached with clamps.

 

[RicoP5]

block? or valve cover?

 

[boostedmsp]

block? or valve cover?

The PVC valve and the block are connected with clamps. The AN fittings are on the oil catch can.

 

[RicoP5]

i think what u are reffering as block im understanding as a different thing lol.

so maybe this way i can be clear and not confuse you or my self

one line goes to the side of valve cover and the other one on top of it where the pcv is on top of the valve cover correct?

 

[boostedmsp]

Yes

 

[Protege_MP3_506]

Can you guarantee that the hid ballast will work? I had one go out the other day

 

[boostedmsp]

They are brand new and never installed on a vehicle. Package was only opened for pictures. So yes.

 

[Protege_MP3_506]

Ok. I just worried about shipping too. I dropped one of my ballasts and it died. I will send paypal and pm with info

 

[boostedmsp]

All items are to be shipped today. Someone make me a reasonable offer on the SSAFC V2 and 440cc injectors for the ultimate in MSP Tuning!

 

[big Lou]

Money sent for Vac lines!

 

[boostedmsp]

SSAFC Sold! Everything was shipped today and I should get you guys some tracking numbers later on.

 

[JDMazdaFamilia]

No ******* way?!?!?!?!?!?!?!$&?"@!%^+=[~!

Are the 440s still available?

 

[boostedmsp]

Pm'd

I just want to forewarn people that Cash talks and whoever sends me money first for the injectors gets them. I don't operate on a dibs system and either you send via paypal or its not a done deal. I have multiple people who offer money for something and then don't get back to you.

 

[highflyin285]

Pm'd on catch can

 

[bluegrass855]

Pm'd

I just want to forewarn people that Cash talks and whoever sends me money first for the injectors gets them. I don't operate on a dibs system and either you send via paypal or its not a done deal. I have multiple people who offer money for something and then don't get back to you.

Then state that in your reply's, I offered you a price for the vacuum block and silicone lines that you accepted at 10:20 pm that night and gave me your Payapl info. The next morning at 9:30 am I went to send you the payment (first time I had checked my computer the next day) and you sold the lines out from under me...not a good way of doing business my friend....A deal should be a deal! you gave me less than 12 hours...

 

[JDMazdaFamilia]

I wasn't Upset cause you sold it I would have too, i was upset cause the ssafc is hard to come by.. This guy above me needs to chill out ofcourse it's gonna go to who sends the cash first there's no guarantee you're gonna pay just cause you say you are..

 

[boostedmsp]

I understand bluegrass and I apologize if you feel cheated in any way. Perhaps I should have said that in my first post but I didn't. I accepted your offer and it wasn't paid for, the next in line got it. Hell I have given my paypal info to 2-3 people on the injectors but NONE of them have responded. The first to pay gets the shipment.

UPDATED SOME PRICES. GET THEM WHILE THEY LAST!