Hey Guys
Most of you probably don't know me, I don't really post here that much mainly cause im a N/A person and pretty much everything now a days is turbo talk. Kinda feels like im 4 years late to the party tbh. In any event this thread will be a record of my N/A build, its not going to be wild like installshield or anything, but should be up there with the rest of the crazy N/A peeps.
Mod List:
Engine/Transmission:
Custom Weisco ~12:1 Pistons with 21mm wristpin.
3SGTE Rods
3SGTE Oversized Bearings
Modified Crank to Suit Bearings (i.e. tighter tolerances all round) + Achieve thicker bearings.
Samco Radiator Hoses
AWR Engine Mounts - 70 Durometer
Modified Head - 5 Angle Valve Job, Blending, Ported and Knife-Edged Intake Ports, Ported and Knife-Edged Exhaust Ports.
Twiggy Cams
Adaptronic e440D
DocB Racing Oil Pump
Peterson Pressure Release Valve
Modified MBSP for Oil Return
Oil Filter Relocation Kit:
- Works Engineering Oil Adapters
- Aeroflow AN10 Fittings All Round
- Aeroflow Black Tubing
Focus Adjustable Cam Gears
Jay Racing Thermal Spacers
FS-ZE Intake Manifold
626 Throttle Body (FS-ZEs use them stock)
MSP Oil Cooler
Stant Low Temperature Thermostat
K&N Typhoon CAI
Air Diversion Panel
Autoexe Headers 4-2-1
Custom 2.5" Exhaust + Mid Pipe. High Flow Magnaflow Cat
CR3 Motorsport Radiator Brackets
RR Racing Bush Kit
RR Racing UDP
Mfactory LSD
Fidanza Flywheel - 7.5lb
Custom NPC 760kg Clutch
eBay Short Shifter
Qford Bushes
Mazdaspeed Protege Weighted Gearknob
Interior:
JVC KDR80BT Headunit
Pioneer 6x9 Splits - Front
Pioneer 6" - Rear
Kicker 10" 600W Slimline Sub
JL Audio - 4x75watt Amp.
JVC 2x130watt Amp - Bridged.
Innovate MTX-L Wide Band
AEM Oil Pressure Gauge
Suspension/Braking
Yellow Speed Coilovers - 8kg Fronts/5kg Rears
Progress Rear Sway Bar
Mazdaspeed Familia/Protege Calipers
DBA Street Series Rotors - Slotted (274mm Rear (Mazda 6 GG Rotor))
DBA Street Series Rotors - Slotted (280mm Front (Mazda 6 GG Rotor))
Hawk HPS Pads
Penrite DOT 4 - Racing Fluid
Autoexe 3 Point Strut Brace w/ MCS
Exterior:
DG Carbon Fibre Grille
AAC Sag Fix Brackets
17x7 Mazdaspeed Familia Rims w Khumo KU31 215/45/17
Japanese Familia Badging
Japanese Sport20 HIDs - Painted Black
Smoked Side Indicators
Fog Light Deletes
To Be Installed:
Cusco Lower Strut Brace
Autoexe Rear Strut Brace
ITBs - Need a FP Manifold to Butcher.
Fuel Pump Servicing Kit
1.4kw 626 Starter Motor
Mazdaspeed Front Sway Bar
Gauge Rings
Zentrix Flexi Fuel Module
Want/Need:
Front and Rear Endlinks
E85 Fuel Pump
E85 Injectors
Decomissioned:
Espelir Springs - Linear Springs
Tokico HP Blues - Front & Rear
Autoexe Muffler
Pioneer Headunit
4x135w Amplifier - Power Sub Woofer
Most of you probably don't know me, I don't really post here that much mainly cause im a N/A person and pretty much everything now a days is turbo talk. Kinda feels like im 4 years late to the party tbh. In any event this thread will be a record of my N/A build, its not going to be wild like installshield or anything, but should be up there with the rest of the crazy N/A peeps.
Mod List:
Engine/Transmission:
Custom Weisco ~12:1 Pistons with 21mm wristpin.
3SGTE Rods
3SGTE Oversized Bearings
Modified Crank to Suit Bearings (i.e. tighter tolerances all round) + Achieve thicker bearings.
Samco Radiator Hoses
AWR Engine Mounts - 70 Durometer
Modified Head - 5 Angle Valve Job, Blending, Ported and Knife-Edged Intake Ports, Ported and Knife-Edged Exhaust Ports.
Twiggy Cams
Adaptronic e440D
DocB Racing Oil Pump
Peterson Pressure Release Valve
Modified MBSP for Oil Return
Oil Filter Relocation Kit:
- Works Engineering Oil Adapters
- Aeroflow AN10 Fittings All Round
- Aeroflow Black Tubing
Focus Adjustable Cam Gears
Jay Racing Thermal Spacers
FS-ZE Intake Manifold
626 Throttle Body (FS-ZEs use them stock)
MSP Oil Cooler
Stant Low Temperature Thermostat
K&N Typhoon CAI
Air Diversion Panel
Autoexe Headers 4-2-1
Custom 2.5" Exhaust + Mid Pipe. High Flow Magnaflow Cat
CR3 Motorsport Radiator Brackets
RR Racing Bush Kit
RR Racing UDP
Mfactory LSD
Fidanza Flywheel - 7.5lb
Custom NPC 760kg Clutch
eBay Short Shifter
Qford Bushes
Mazdaspeed Protege Weighted Gearknob
Interior:
JVC KDR80BT Headunit
Pioneer 6x9 Splits - Front
Pioneer 6" - Rear
Kicker 10" 600W Slimline Sub
JL Audio - 4x75watt Amp.
JVC 2x130watt Amp - Bridged.
Innovate MTX-L Wide Band
AEM Oil Pressure Gauge
Suspension/Braking
Yellow Speed Coilovers - 8kg Fronts/5kg Rears
Progress Rear Sway Bar
Mazdaspeed Familia/Protege Calipers
DBA Street Series Rotors - Slotted (274mm Rear (Mazda 6 GG Rotor))
DBA Street Series Rotors - Slotted (280mm Front (Mazda 6 GG Rotor))
Hawk HPS Pads
Penrite DOT 4 - Racing Fluid
Autoexe 3 Point Strut Brace w/ MCS
Exterior:
DG Carbon Fibre Grille
AAC Sag Fix Brackets
17x7 Mazdaspeed Familia Rims w Khumo KU31 215/45/17
Japanese Familia Badging
Japanese Sport20 HIDs - Painted Black
Smoked Side Indicators
Fog Light Deletes
To Be Installed:
Cusco Lower Strut Brace
Autoexe Rear Strut Brace
ITBs - Need a FP Manifold to Butcher.
Fuel Pump Servicing Kit
1.4kw 626 Starter Motor
Mazdaspeed Front Sway Bar
Gauge Rings
Zentrix Flexi Fuel Module
Want/Need:
Front and Rear Endlinks
E85 Fuel Pump
E85 Injectors
Decomissioned:
Espelir Springs - Linear Springs
Tokico HP Blues - Front & Rear
Autoexe Muffler
Pioneer Headunit
4x135w Amplifier - Power Sub Woofer
Last edited: