High Boost Problems/Remedies?

AWDTerror

Member
:
2008 Rally Red Mitsubishi Evo X
Ok so i installed a catback exhaust and how have a catless turbo back system and I have a greddy profec b installed and i'm boosting 16-17psi and hitting fuel cut and can't turn it down anymore. also to see if it was a problem with the boost controller, I hooked the pressure source off the compressor housing straight into the wastegate...same problem, anyone have a remedy? can the wastegate arm be adjusted or something else? or is this something that will go away with warmer temperatures
 
i too had a profec b spec II on my car with fuel cut all over the place.
i also couldn't do a thng about it.
after that i bought the hks evc. the boost didn't have the spike i had with the profec, but i then noticed that the fuel cut was so close to the high boost as is, that i just removed the evc and sold them.
i read some people install the fcd.
i think s/u has one for sale.
 
Last edited:
i have a spec 1 the one with the 3nobs. i think its the free flowing exhaust causing the problem because of the small wastegate and turbo. my hypothesis is it will go away when it get's warmer.
 

New Threads and Articles

Back