HID Install

[rdemattio]

Hello, I ordered the Morimoto Stage 2 HID kit, and it is alot more complex looking than I expected. I've done some googling to try and find a good install guide but havent found any that I feel are very good. Do you guys know of any good guides? Thanks for all the help!

 

[xMazdax]

It shouldnt be that hard. You should already have the projectors. So just unplug the light, take out the rubber gromet. Pull clip out and up and it should swing out. then unscrew the light,

 

[rdemattio]

I have like 4 feet of wires with like 6 different plugs at the end 2 lights and 2 ballast. and some random metal hardware with no directions.

 

[rdemattio]

Does anyone know? I'm going to take my bumper and headlights off now. Every write up I read they dont have this massive gaggle of wire harness and stuff. Any help would be appreciated!/

 

[xMazdax]

Should of just oredered from DDM

 

[rdemattio]

someone told me to get it from retrosource. but thanks for the help....

 

[rdemattio]

I got them installed. The way the wire harness works is that I only plug 1 side of the low beam plugs into it. There is a - and a + cable that goes on the battery, and then 2 plugs that go to each ballast. When you turn on the healights the power from the one headlight switch throws a relay that enables the battery power to go to the ballast.