Help!! Windows won't roll down after CAI install

[speed6r]

I just put in a Fujita CAI, and once i re-connected the battery i noticed the passenger windows won't roll up, or down from the driver side controls. Any help would be much appreciated!
-Thanks-
Murder

 

[GoFast]

did you check ALL of your fuses? Did you try rolling them down from the passenger side?

 

[speed6r]

did you check ALL of your fuses? Did you try rolling them down from the passenger side?

Fuses no, and I can still roll the windows down from the passenger side

 

[special--k]

lol... the CAI should not affect the windows... something came lose when you were under the hood. As stated above, check your fuses, and try all other windows.

 

[1quickturbosix]

probably just out of power window fluid.

 

[speed6r]

probably just out of power window fluid.

lol! yea i think the headlight fluid is low too !

 

[Dr. D]

there is a tread about this all you need to do it go to each door and from the top roll the window down a little bit then roll it up holding up the button for a few moments and you will hear/feel ma few clicks in the doors and that recalibrates the automatic windows... you will need to do this everytime you disconnect the battery

 

[Dr. D]

http://www.mazdas247.com/forum/showthread.php?t=123697742 here in the link which is 2 threads up from yours... (dunno)

 

[chiefmg]

I thought we had seen the last of these threads. The info is also in your owner's manual, everyone should read theirs as it is amazing what you can find out about your car.

 

[GoFast]

Ok since it now seems that we have solved the issue...

probably just out of power window fluid.

(rofl2)

 

[sunshineFC]

I had the same problem.
check your cross-drilled/slotted radiator hoses.
-a

 

[Dr. D]

(lol)^ that is the best one i've heard yet!!!

 

[tunersteve]

Specs must be out on the rotary girder. That would do it.

 

[Killer]

Chrome muffler bearings are shot to hell.

 

[speed6r]

there is a tread about this all you need to do it go to each door and from the top roll the window down a little bit then roll it up holding up the button for a few moments and you will hear/feel ma few clicks in the doors and that recalibrates the automatic windows... you will need to do this everytime you disconnect the battery

Thanks! this worked!

 

[1quickturbosix]

It might also be the fleeter spin.... its right next to the flux capacitor. Check that and let us know if it solves the problem.

 

[Atreyu3388]

Make sure the horn fluid is topped off too, while you're checking all the other suspects

 

[wannabe]

why do we bother with stickys? no one ever reads them.....

 

[lynnriderm6]

its in your manual book lol same thing happend to me when you disconnect your bat

 

[VRMS6]

Ok ok....partys over move on...nothing to see here....