Help MSPers with Intakes - Creaks & Squeaks

[skilletrx]

I've got a lot of squeaking going on under the hood due to my Injen CAI. Seems like its rubbing on some hoses and bumping into the fan, which is causing annoying creaking / squeaking noises while driving. Do you guys have the same problem with the CAI piping rubbing against hoses and/or the IC fan? Maybe I need to refit/reinstall?

Thanks in advance, I'll try to take pics soon.

 

[BOOSTR]

Most likely you need to readjust the piping at the couplers. Its a tight fit in certain spots, but you can achieve enough room to clear the fan and uppipe.

 

[skilletrx]

thanks for the speedy reply, i'm going to double check it if you guys are clearing the Fan and the hose

 

[BOOSTR]

You might want to jack it up and work from underneath when fitting at the turbo. Not a must but it just seemed to make it easier.

 

[SpeedAdiction20]

i had installed the SMIC, hardpipes and injen all at the same time, it was pretty close at some points as said before, but you may need to move around the pipes, or maybe just take them out if you have too, and angle the injen pipe right, that and make sure the vibration nut or whatever it is, but make sure its tight and the pipe isnt touching, all obvious stuff, but it should fit fine without any problems. gl