HD Lip Help

[speed6r]

Can anyone tell me what the name of the product is, that we use for the HD lip? every time I go to HD for the stuff, I ask a employee for help and they look at me like im crazy! Also what do you use to adhear the lip to the stock front bumper
Thanks in advance
-Murder-

 

[801pro]

garage door moulding.

 

[speed6_dude]

its garage door bottom deal... 2 and 1/4 wide 9' long! its a orange and white plastic wrapper! hold it on with 3m double sided tape or similar product, you can find the tape at hd or any auto store; be sure to get more then one roll. Also use half to one inch self tapping screws.

Refer here if needed!
http://www.mzspd6.com/forum/showthread.php?t=123722778

Good luck!

 

[adiosix]

Use 3m Indoor/outdoor. Its the best. With the molding and tape at Home depot, it was like $13.

Just be precise when molding it, cause mine shows a little bit of the tape.

I didn't use screws on mine, and I've had mine on for 2 months and had no problems.

 

[SEN]

Loctite now makes double-sided tape u can pick up @ Walmart for like $6 a roll. It's ridiculously strong. It was like 45-50 degrees out when I did mine so I used a heat gun to warm it up a little. That lip isn't budgin' and I didn't need to use any screws!