GTX3071 With supporting mods
Reason for sale: Too much turbo for me. Will ship to lower 48 through USPS Insurance will be provided. Items can and are ready to ship together or separately. $2,500 takes everything listed.
GTX3071 .63 A/R Rated for 575HP to crank 500 miles on it $1850.00 Shipped.
Details: Turbo's hotside is PnP for IWG use, but is setup for EWG using a Cobb Bracket. Original IWG is unavailable. The Hotside is also coated in a 3000 degree titanium coating (outside only) The compressor is also coated (inside and out) with a special film coat that provides a PnP effect, nice silver look, and helps to increase airflow. New owner will need to purchase studs and Nuts (9 total) Kit has a brand new Oil drain line, HTS 4 ply coolant hose to swap with your OEM, new oil feed bolt and washers, new Boost nipple, new coupler for those using a TMIC. PICTURE WITHOUT SIGNAGE IS PRE-INSTALLATION AND SHOWS THE COATINGS PRIOR TO INSTALL.
Sure ID325 full intake system $325 shipped
Details: 3.5in MAF housing 3.25in ID, Easy to complete a maf cal with, all hardware included.
Tial MV-R 44mm Black EWG,$325 shipped
Details: Currently set with a 0.9 bar spring setup, alls springs, clamps, flanges, included. One Vband clamps screw will need a new nut. Also, one set screw backed itself out, didn't notice till I removed from the car, held Pressure just fine without it.
Hallman MBC "NEW" with cockpit cable included $90 shipped
Sold Items
SSP 44mm Screamer pipe SOLD!
List Date: 11/2/2013
For more info, click here to view the original listing: GTX3071 With supporting mods
--------------------------------------
On Sale For: $2300 + $50 Shipping
--------------------------------------
Reason for sale: Too much turbo for me. Will ship to lower 48 through USPS Insurance will be provided. Items can and are ready to ship together or separately. $2,500 takes everything listed.
GTX3071 .63 A/R Rated for 575HP to crank 500 miles on it $1850.00 Shipped.
Details: Turbo's hotside is PnP for IWG use, but is setup for EWG using a Cobb Bracket. Original IWG is unavailable. The Hotside is also coated in a 3000 degree titanium coating (outside only) The compressor is also coated (inside and out) with a special film coat that provides a PnP effect, nice silver look, and helps to increase airflow. New owner will need to purchase studs and Nuts (9 total) Kit has a brand new Oil drain line, HTS 4 ply coolant hose to swap with your OEM, new oil feed bolt and washers, new Boost nipple, new coupler for those using a TMIC. PICTURE WITHOUT SIGNAGE IS PRE-INSTALLATION AND SHOWS THE COATINGS PRIOR TO INSTALL.
Sure ID325 full intake system $325 shipped
Details: 3.5in MAF housing 3.25in ID, Easy to complete a maf cal with, all hardware included.
Tial MV-R 44mm Black EWG,$325 shipped
Details: Currently set with a 0.9 bar spring setup, alls springs, clamps, flanges, included. One Vband clamps screw will need a new nut. Also, one set screw backed itself out, didn't notice till I removed from the car, held Pressure just fine without it.
Hallman MBC "NEW" with cockpit cable included $90 shipped
Sold Items
SSP 44mm Screamer pipe SOLD!
List Date: 11/2/2013
For more info, click here to view the original listing: GTX3071 With supporting mods
--------------------------------------
On Sale For: $2300 + $50 Shipping
--------------------------------------
