I have a different plan, but link me up to this stuff just for grins.
PS - 1.5" for the lower rad hose is HUGE. I measured it at 1 1/8" ID.
GI: SpeedCircuit Protege Turbo Kit
- Thread starter Kooldino
- Start date
I have a different plan, but link me up to this stuff just for grins.
PS - 1.5" for the lower rad hose is HUGE. I measured it at 1 1/8" ID.
Maxx Mazda
Contributor
- :
- Stock P5
Ya, that sounds about right. Maybe I'm going off outer diameter. I don't have a link, it's pretty self explanitory though.
- :
- 02' Protege ES (Gone)
16' Mazda 6 sport manual
Check the 1st post my man.
MP3Night
MS3,Mazda3,MSP
- :
- 02' Protege ES (Gone)
16' Mazda 6 sport manual
no problem...lol
Update - was sidetracked by another job recently, but here's my updated to-do list:
1-Finish downpipe (it's about halfway done now)
2-Make a wastegate dump tube (and tie it into the downpipe)
3-Weld on a BOV flange
I won't get to touch it until late this week, but we're gonna be firing it up soon enough.
1-Finish downpipe (it's about halfway done now)
2-Make a wastegate dump tube (and tie it into the downpipe)
3-Weld on a BOV flange
I won't get to touch it until late this week, but we're gonna be firing it up soon enough.
- :
- 02' Protege ES (Gone)
16' Mazda 6 sport manual
Where are you guys in jersey?
Update - I'm currently building a couple of Protege blocks as my main focus right now, but here's what's left to do on the kit:
-Finish downpipe (it's about halfway done now) and add an O2 bung to it.
The car hasn't been run in quite some time, so it needs fluids, etc, and I have to tighten down all of the clamps for the turbo kit, wire some things up, etc.
Aside from that, the kit is pretty much finished, I just need to get the car itself going.
-Finish downpipe (it's about halfway done now) and add an O2 bung to it.
The car hasn't been run in quite some time, so it needs fluids, etc, and I have to tighten down all of the clamps for the turbo kit, wire some things up, etc.
Aside from that, the kit is pretty much finished, I just need to get the car itself going.
- :
- 2002 BJFW, 2007 BK3P, 1979 SA22C, 2005 BK3P
Just to make you guys sweat, here's a teaser pic.
very nicely done
PS - If anyone wants the prototype manifold, PM me:
PM'ed
The prototype kit is pretty much a done deal, I just have to connect the downpipe to the stock exhaust.
I can show you guys the completed kit if I really wanted to, but it's much more fun to post a pic here and there to drive you guys nuts. Plus it will buy me some time to get this car running and test it.
The car itself needs some work, as it's been sitting for some time and is a bit rusty.
I can show you guys the completed kit if I really wanted to, but it's much more fun to post a pic here and there to drive you guys nuts. Plus it will buy me some time to get this car running and test it.
The car itself needs some work, as it's been sitting for some time and is a bit rusty.
MP3Night
MS3,Mazda3,MSP
When this thread hits page 17, I'll post another pic.
Hurry keep posting ppl lol
The manifold is freaking nice
