GI isport sedan roof spoilers...

ScratchNSniff · May 4, 2010

Yes, they allow payments...that is what I am doing with the Protege5 spoiler...

civickilla03 · May 4, 2010

Update my payment is in!

1. Msp03.5 (pending price and design)-Deposit sent
2. paniaguae640 (pending price and design)
3.
4. Pastime-Gamer(^^^)
5. XxaltezzaxX (pending price and design)
6. MS_Rick (pending price and design) DEPOSIT IN
7. _MSprotegy (pending price and design)
8. civickilla03 ( pending design) in carbon fibre please-DEPOSIT IN
9. 2k3prorida (pending design)

msp03.5 · May 4, 2010

_MSprotegy said:
can we pay it in payments? i mean gdamn!! lol
my finger is itching sooo bad! i want it!!!!!!!

Just do it! lol make payments come on

Ash-Lyn · May 5, 2010

Update

FYI, Bryan and I have made a business decision (check out the explanation on the Window deflector thread). We will honor our previous committment for a minimum deposit of $50 for this project, but this is the last one. We still only have 3 deposits. Time is running out for us to continue on with this or any other Mazda project. Remember, a $50 deposit will insure that we produce this even if it takes you months to pay it off. We just want to see a committment from you before we waste anymore time. Thanks, Bob

civickilla03 · May 5, 2010

were you guys at?

1. Msp03.5 (pending price and design)-Deposit sent
2. MS_Rick (pending price and design) DEPOSIT IN
3. civickilla03 ( pending design) in carbon fibre please-DEPOSIT IN

4. Pastime-Gamer(^^^)
5. XxaltezzaxX (pending price and design)
6.
7. _MSprotegy (pending price and design)
8. paniaguae640 (pending price and design)
9. 2k3prorida (pending design)

Ash-Lyn · May 5, 2010

civickilla03 said:
were you guys at?

1. Msp03.5 (pending price and design)-Deposit sent
2. MS_Rick (pending price and design) DEPOSIT IN
3. civickilla03 ( pending design) in carbon fibre please-DEPOSIT IN

4. Pastime-Gamer(^^^)
5. XxaltezzaxX (pending price and design)
6.
7. _MSprotegy (pending price and design)
8. paniaguae640 (pending price and design)
9. 2k3prorida (pending design)

Near Sacramento, California

civickilla03 · May 5, 2010

o lol i was callin out the other people, tryin to push the deposits.

but thats cool, ima have to visit you guys one day, so i have an excuse to go over there

JDMazdaFamilia · May 5, 2010

hey so whats the minimum on payments?

MS_Rick · May 5, 2010

^^

iSport said:
We would be willing to do this if the serious interest is there. The price would depend on a few things. If we had an existing piece that you wanted copied we would need that to make a mold of. If you wanted one that could be slightly modified we would need that one (probably would need to be re-painted after we finished with it). If you wanted a complete new design, we would need to settle on one that would satisfy the majority and of course this one would be more expensive. As an example, the wing lip that we just finished took days to get right and to finally produce a part. Getting back to this, we would need at least six people willing to put up a $50.00 deposit for the mold to be made before we would even start. If we did not reach six, then the deposits would be returned. Let us know. Keep your eyes on "Circuits" group buy thread regarding the P5 wing lip... we should have some install pics soon and a carbon fiber piece probably next week. Most of the group buy wanted fiberglass.

_MSprotegy · May 5, 2010

JDMazdaFamilia said:
hey so whats the minimum on payments?

+1 for the penny pinchers

Ash-Lyn · May 5, 2010

JDMazdaFamilia said:
hey so whats the minimum on payments?

We have said this so many times......we need six deposits of $50.00 to continue on with this. That is the minimum and it will be refunded if we do not reach six. Once we do, we will produce parts and fill orders when final payments are received. If you want to wait months to pay yours off, that is ok.....the $50.00 locks you in to the current pricing.....

Outlawstar98 · May 5, 2010

If the first post was updated with all the current infomation this would be MUCH easier to understand IMHO. Like What I did with the fenders page... But this isnt updated enough and kept on top of, just a IMHO.

_MSprotegy · May 5, 2010

iSport said:
We have said this so many times......we need six deposits of $50.00 to continue on with this. That is the minimum and it will be refunded if we do not reach six. Once we do, we will produce parts and fill orders when final payments are received. If you want to wait months to pay yours off, that is ok.....the $50.00 locks you in to the current pricing.....

im guessing he meant what the payments would be after the deposit gets the ball rolling, but im guessing its as much as we want aslong as it gets paid for.
you're convincing me man (bang) lol

SwirlFX · May 5, 2010

Come on guys lets get those deposits in.

I want to see these come to life.

JDMazdaFamilia · May 5, 2010

okay sorry for being a penny pincher..
i just really want one nd wanna be able to
afford it.. and i did see the $50 payment but i
was asking about how much needs to be paid monthly
or whatever..

repthemazdas · May 5, 2010

u know what ill send deposit saturday or monday

msp03.5 · May 6, 2010

Outlawstar98 said:
If the first post was updated with all the current infomation this would be MUCH easier to understand IMHO. Like What I did with the fenders page... But this isnt updated enough and kept on top of, just a IMHO.

Thanks for the suggestion first post has been updated. Hopefully with all the information needed.

_MSprotegy · May 6, 2010

pm me paypal info

civickilla03 · May 6, 2010

JDMazdaFamilia said:
okay sorry for being a penny pincher..
i just really want one nd wanna be able to
afford it.. and i did see the $50 payment but i
was asking about how much needs to be paid monthly
or whatever..

theres no minimum monthly payment, just as long as you pay it off, you can take as long as you want, and pay as little as you need to. I SAY YOU GO FOR IT!!!!!

repthemazdas · May 6, 2010

put me back on list

GI isport sedan roof spoilers...

Undisputed Parts God

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

PS!

Member

Member

Member

PS!