FS: MSP Cylinder heads and FS Block

I was going to work on a complete rebuild for my msp but its gonna cost me a little to much money than what I have to work with so I am ridding of some parts. Now both cylinder heads and engine block I just got back from the machine shop. Both cylinder heads pressure tested perfect, no leaks. They do need to be milled just like every other aluminum cylinder head that has been used. All valves and springs and lifters are good. The machine shop let me know that the valve face needs to be grinded down to be able to seat properly. or lightly sanded down if anyone has done engine work, I have. They come with camshafts and gam gears. The block has been honed cleaned and checked also and is in perfect condition. I do have a forged crank for it that didnt go to the machine shop, that would be extra for that.

Asking $350 per head with camshafts and cam gears!
Asking $200 for FS Block
Asking $50 for the valve cover

 

[nopistons3]

Gotta a small update.... I recently sold one of the cylinder heads so there is still one head available along with the crank block and valve cover if needed. I started working for a really good high end shop and found a small test to do personally on the heads to make see if they are good. Ive said what the machine shop said but I dont really believe it because they were both running perfectly fine when removed

 

[nopistons3]

Possibly interested in the head. Any idea of cost to get it drop in ready?

I just shipped a head to new hampshire for $300. All that the machine shop told me was that the cylinder head needed to be milled as most aluminum. Im not exactly sure what it costs to do all that

 

[nopistons3]

Ok now Im not sure if I have to update pictures or what, but I still have an engine block, cylinder head and crank for sale. I am open to any type of offers at the moment for these items. Just moved into a house and its costing me a little more than hoped for. Thanks

 

[blackwidowMP5]

pm sent