FS: cobb FMIC

[Biggu]

Ive decided its best for me to de tune my car and just be it like it is, my daily. I have a race car for my toy, no need to make the speed more of a toy then it is.

so COBB FMIC kit with the gray powered coating on it, all brackets needed, all silicone couplers and lastly all Tbolt clamps. complete kit. over all in good shape, FMIC as you can see has little to no bent fins. just cosmetic wear which is mainly just scratches, there is one gouge in the piping that is from it rubbing on the frame but there is no performance impact from that.

Asking $700, and please dont low ball the crap outta me on this, pricing I feel is quite fair for a highly sought after kit that is in as good of shape as this is. I am willing to work on the price and im willing to work on it a bit more for local pick up in Columbus Ohio.
the kit has about a year and 2 months use, 17k miles.

pics as needed.

 

[Fuzzyblaa56]

Typical gains?

 

[Biggu]

not sure on the power increase to be honest i never dynoed with it on

heres what cobb has to say about it tho
"
Cobb Tuning Front Mount Intercooler Kit
Application: MAZDASPEED 3

COBB Tuning is proud to announce the release of the all new Front Mount Intercooler system for the 2007-08 MAZDASPEED 3.

The factory top mounted intercooler can easily be over worked and over heated due to its smaller size. In return, the intake air temperatures rise causing a loss in power. Replacing the factory intercooler with the COBB Tuning Front Mount Intercooler will ensure your engine is receiving the coolest possible air, allowing you to enjoy more power that is also much more consistent.

One of the more common issues with a front mount intercooler is turbo lag. Our testing shows our core inlet pressure at an average of 15.45 psi and the outlet pressure at an average of 14.8 psi. That results in an averaged pressure drop of only 0.65 psi, which in turn produces little to no turbo lag at all! We also tested the cooling capacity of our core. With an ambient temperature of 91 degrees, our inlet temperature averaged 193 degrees F while our outlet temperature averaged 95 degrees F. this is an average temperature drop of 98 degrees F.

* Bar and plate 24" x 3.5" x 7.9" aluminum core
* 2.5" aluminum tubing powder coated dark gray
* Blue silicone and t-bolt clamps
* All brackets and fasteners are included
* Some trimming of bumper tabs is required
* Made to fit stock BPV or aftermarket BOV that is stock fitment
* Retains the stock bumper beam and does not require cutting the bumper beam
* Undertray can be reinstalled with no modifications
* Does not require disconnecting of the power steering lines
* CFD tested and air flow optimized

Engineered for maximum performance and precise fitment, the purposeful and aggressive looks of the COBB Tuning Front Mount Intercooler will deliver pure driving pleasure! We recommend professional or experienced installation as the fitment of the pipes needs to be specific to clear all the places of the chassis/engine/transmission.

"

 

[Biggu]

$675 shipped to 48 states! ill even be throwing in the silicone recirc tube from street unit, it was cut to size and now its to short for me to use with my TMIC.

 

[Mybeauner]

BUMP!

Wish I had the cash!

 

[2009speed3GT]

Tempting......

 

[skallen]

*Drools*....These things are hard to find too....Great price...And it's a Cobb....Wish I had the cash!!

 

[manelscout4life]

bump
someone take this!
best fmic kit for the speed3 hands down

 

[stageup]

what do you mean all brackets needed? is this complete or no?

 

[whteltning]

what do you mean all brackets needed? is this complete or no?

In context, it sounds like it means it includes "all brackets needed" for install

 

[Biggu]

all brackets needed for install are there. it has been my experience that some times kits when used done include the brackets making it hard to mount everything.

 

[Biggu]

sale currently pending.

 

[Biggu]

Sold!