engine explosion diagrams?

[rusty_mazda]

does anyone out there have engine explosion diagrams for the 2.0 pro.? my engine is in a hundred peices, and i'm not sure where a few of the bolts go. THAT SCARES ME!

 

[xelderx]

Take pictures of all the bolts and I might be able to tell you

 

[TheMAN]

lets go ass in first into the pool..... take apart the engine without sortting & labeling the parts and not have an overhaul manual to work with!

 

[tekkie]

lmao, yeah not a great idea but anyway post us some pics and we can probably tell you

 

[jadonP5]

those go in the drawer labeled "spare parts"

 

[rusty_mazda]

lets go ass in first into the pool..... take apart the engine without sortting & labeling the parts and not have an overhaul manual to work with!

yeah, it seems like you're trying to jump ass first into my foot. i asked for help not criticism, but seriously i'm glad i could aid in boosting your ego by being the butt of your joke. and again if you have anything helpful to contribute it would be appreciated

 

[rusty_mazda]

thanks i'll try to do that tomorrow, and i can tell you i think they MIGHT have come from. also i apologize for the triple thread, my computer was screwing up.

 

[_Sloteg_]

my engine is in a hundred peices, and i'm not sure where a few of the bolts go. THAT SCARES ME!

WOW that sound's like fun.....(ughdance)



Good luck with everything!

 

[TheMAN]

maybe the pile of engine parts are a pile of rusty parts

 

[rusty_mazda]

maybe the pile of engine parts are a pile of rusty parts

probably true by now, the motor's been sitting around for about five months

 

[TheMAN]

then don't even bother putting it back together yet... I bet you didn't have the parts oiled and stored away in air tight boxes and have the block and head wrapped up.... all of that s*** will need to be dunked to be cleaned

and go buy the ******* overhaul manual... it's only 25 bucks from the dealer

 

[Dimitrios]

No doubt. Time to break out the dipping tank and get that rust from the water and oil jackets.

 

[rusty_mazda]

the block is getting bored and dipped and all that good stuff now, so it should be good to go when i get it back. and this overhaul manual, will it help me with most of my problems?

 

[Dimitrios]

I'd suggest a rebuild kit from Protegegarage too:
http://mazda3online.web.aplus.net/product_info.php?products_id=436


Total Engine Rebuild Package - Protege 2.0 Liter
FREE SHIPPING.
Includes the following:

* Rod Bearings
* Camshaft Bearings
* Crankshaft Bearings
* Thrust Washers
* Camshaft Cap Bolts
* Head Bolts
* Oil Galley and Coolant Passage Plugs
* Head Gasket
* Manifold Gaskets
* Throttle Body Gasket
* Water Pump and Block Gaskets
* Valve Cover Gasket
* Valve Cover Washers
* All Other Associated Gaskets
* Timing Belt

Parts are OEM Mazda.

 

[rusty_mazda]

pics

i have no idea where the single bolt came from. i have removed my clutch and flywheel and took it down to a bare block. any help is greatly appreciated.

 

[gimpo2]

no offense but this thread is kind humorous with the pics of the bolts and stuff

i rebuilt my engine a few months ago and i don't remember any of those parts

the big black ones look like transmission housing bolts

those don't even look like they came from the head or in the block or anything.... (uhm)

 

[xelderx]

Looks like a 10mm head on it. Possibly the EGR pipe mount bolt where it mounts to the head. Will be right under the piece where the top radiator hose goes into the head. There is also a similiar bolt that mounts the speed sensor into the top of the tranny.