Emanage Dyno about time

[Dexter]

Thats wicked cool, good job guys. Which O2 sensor did you put the simulator on, both of them?


CustomMSP, damn your editing skills.

 

[CustomMSP]

haha

 

[AutoBox]

Where Can I Get A O2 Simulator

 

[jersey_emt]

Gotta be on the front O2 sensor...the ECU only uses the rear O2 sensor signal to see if that cat is working

 

[CustomMSP]

Also, is the pressure sensor a requirement or are we able to use the injector map in the support tool to manipulate the a/f ratios?

Thanks.

 

[orangezoom]

I can not wait to scan it I mean front end hp like you would not beleave.

Just got my car and hard to keep the tires from spinning.
If you have ever seen the dyno from a stock car you will see how it goes up and down this is smooth right till the end.
The main thing is the a/f ratio it looks beautiful, they said they had it up to 220hp but the way it is now it will win more races.

 

[orangezoom]

Where Can I Get A O2 Simulator

Essentialspeed

 

[Dexter]

Gotta be on the front O2 sensor...the ECU only uses the rear O2 sensor signal to see if that cat is working

Thats what i figured....

Hmm...just pull the whole damn thing out, wire up the simulator and throw a WB sensor up in that heazy. Then you dont need to get another bung welded on...

 

[jersey_emt]

Hmm...just pull the whole damn thing out, wire up the simulator and throw a WB sensor up in that heazy. Then you dont need to get another bung welded on...

You just read my mind.

 

[AutoBox]

OUCH.....essensital wants $130 for their 02 modifier/simulator....still cool though u can set the closed/open loop transition by rpm....

 

[TiGrayMsp716]

So all you need to make this work is the greddy emanage and a O2 simulator?

 

[CustomMSP]

Is the pressure sensor a requirement for tuning or we should be alright with just our maf?

Thanks.

 

[boostisgood]

Hrrm, time to ebay an emanage.

 

[freekwonder]

what is the pressure sensor, i think i under stand about the o2 modifier. you solder it into the o2 sensor so it cant go into closed loop, that way it wont over ride the piggy back.

 

[ForceFed]

OMFG!

IT WORKS!
And it is the cheapes unit out there!
About a G and we have full control of everything!
One question still remains to be answered?
What about the ignition coil part where the E manage doesn't workwith our coils?
Matt

 

[CustomMSP]

The pressure sensor takes over when the MAF reaches it's limits as to airflow. Also, you get a broader map for tuningh a/f with a pressure sensor.

 

[freekwonder]

The pressure sensor takes over when the MAF reaches it's limits as to airflow. Also, you get a broader map for tuningh a/f with a pressure sensor.

ok, i know what pressure switch you are talking about. so instead of using the MAF, we will be swithing to a MAP system (mass air pressure) like the hiboost kit comes with. which at the same time will let you run a BOV open vent with out stalling.

 

[Dexter]

Well since the emanage is a piggyback, it think the MAF still says hooked up...

 

[orangezoom]

Well since the emanage is a piggyback, it think the MAF still says hooked up...

Yes it does

 

[Dexter]

This is real cool s*** though, makes me want an emanage again...