Dragger's Guide: Mazdaspeed Protege 1/4 Mile List
- Thread starter InsidiousMSP
- Start date
- Status
- :
- 2003.5 Titanium Gray MSP #1699
If it's powered by an FS-DET, I think it should count.
Got 7 runs in today. This is with 11 psi, motor mounts, FMIC with 2.5 inch piping, 3 inch dp, 3 inch exhaust, injen, falken azenis with 16' 5zigen rims, and springs.
weather was sunny and right around 55 degrees.
runs in order:
14.602@95.71mph
15.232@97.19 (fuel cut ownz me)
14.347@98.47mph
14.789@98.06mph(wheel spin ownz me)
14.341@97.79mph
14.302@98mph
14.263@98.48mph
I will have more numbers when the new turbo and other miscellaneous hardware go in.
-B
weather was sunny and right around 55 degrees.
runs in order:
14.602@95.71mph
15.232@97.19 (fuel cut ownz me)
14.347@98.47mph
14.789@98.06mph(wheel spin ownz me)
14.341@97.79mph
14.302@98mph
14.263@98.48mph
I will have more numbers when the new turbo and other miscellaneous hardware go in.
-B
#878MSPChick
Member
- :
- Audi A4 1.8T Quattro
Bone stock MSP:
Reaction: .821
60': 2.407
330': 6.983
1/8 mile: 10.603
1/8 mph: 72.39
1000': 13.669
1/4 mile: 15.282
1/4 mph: 94.86
Reaction: .821
60': 2.407
330': 6.983
1/8 mile: 10.603
1/8 mph: 72.39
1000': 13.669
1/4 mile: 15.282
1/4 mph: 94.86
mazdaspeed75
ZOOM ZOOM BOOM BOOM CLUB
- :
- 2003.5 mazdaspeed
neew times
Here my new times . I ran this on 24psi in the stock tires. My 60 ft times need to come down alot and i should be able to run the 14.3 or 14.2 i think i can get . This was at alittle under 9 psi . The 14.7 was with a srt He thought he would show off and had a buddy in the car with him to video and i walked his ass to the 8th mile . He didnt run the 14.1 It was a 14.5 I dont know why it printed that . He never got better than a 14.5 . Anyway i know it drivers race I pulled a .514 reaction time dam almost perfect . Any way 60 ft must come down . Dam traction issues .
Here my new times . I ran this on 24psi in the stock tires. My 60 ft times need to come down alot and i should be able to run the 14.3 or 14.2 i think i can get . This was at alittle under 9 psi . The 14.7 was with a srt He thought he would show off and had a buddy in the car with him to video and i walked his ass to the 8th mile . He didnt run the 14.1 It was a 14.5 I dont know why it printed that . He never got better than a 14.5 . Anyway i know it drivers race I pulled a .514 reaction time dam almost perfect . Any way 60 ft must come down . Dam traction issues .
Attachments
mazdaspeed75
ZOOM ZOOM BOOM BOOM CLUB
- :
- 2003.5 mazdaspeed
It dropped my time 2 tenths of a second. I need to get motor mounts. Havent looked into it yet I want to get the front ones but how hard is it to get them in. Is that what you are asking me about staping the motor. These cars can get good times if the right thing is setup. I was getting a 2.0 60 ft time when i was at 7 1/2 psi. Extra boost makes it hard. Practice and more pratice. Hey do you have the brackets for the stock intercooler removal. Thanks TonyMPNick said:
boosted protege
Member
- :
- 2003 Spicy Orange MSP
need to update my 1/4 mile time 13.938@100 mph
.504 r/t
2.156 60ft
9.019 1/8th
79.68 mph in 1/8th
13.938 1/4
100.17 mph
.504 r/t
2.156 60ft
9.019 1/8th
79.68 mph in 1/8th
13.938 1/4
100.17 mph
boosted protege
Member
- :
- 2003 Spicy Orange MSP
sounds like your launching at to many rpms..i launch my car at between 1500-2000 rpms just right under boost other wise youll just brake your tires loose
mazdaspeed75
ZOOM ZOOM BOOM BOOM CLUB
- :
- 2003.5 mazdaspeed
sweet times jason Were did you run that at hallsville . I went to rr raceway friday night . That track sucks I think hallsville is faster . Man i lowered the tires to 24 psi and got a 14.5 . Ill catch up with you some day. What psi in the drags did you run. Iam looking for the p5 rims. LET Me knoiw if you find any . There from the 2003 p5 right . 15'' chrome? Man we need to run on the street . hahahahahboosted protege said:
- Status
