Installed a Hidden Hitch Class III and the Mazda OEM wiring harness on my 2009 CX-9 GT AWD today. I figured I would post pics to share.
Mazda OEM hitch harness part number is: 0000-8E-N13. $61 plus shipping at http://www.mazda-parts-dealer.com This harness should work on 2009/2010 CX-9s all AWD models and FWD GT models.
UPDATE 5/17: Mazda OEM hitch wiring harness install instructions are attached to the bottom of this post. NOTE: The instructions say the harness connector is on the driver side. I found it on the passenger side, so I installed the hitch module near the tire jack, instead of over by the driver side storage bin. (This actually made the install much easier, I only had to remove the storage compartment and the rear threshold plate)
The hitch install is easy - 6 bolts. Used a hydraulic jack to hold it in place while installing the bolts. etrailer.com has a video if people want to see the install
Remove 2 plastic push nuts in the bottom of the storage tray and the whole tray comes out.
Mazda OEM hitch harness part number is: 0000-8E-N13. $61 plus shipping at http://www.mazda-parts-dealer.com This harness should work on 2009/2010 CX-9s all AWD models and FWD GT models.
UPDATE 5/17: Mazda OEM hitch wiring harness install instructions are attached to the bottom of this post. NOTE: The instructions say the harness connector is on the driver side. I found it on the passenger side, so I installed the hitch module near the tire jack, instead of over by the driver side storage bin. (This actually made the install much easier, I only had to remove the storage compartment and the rear threshold plate)
The hitch install is easy - 6 bolts. Used a hydraulic jack to hold it in place while installing the bolts. etrailer.com has a video if people want to see the install
Remove 2 plastic push nuts in the bottom of the storage tray and the whole tray comes out.
Attachments
Last edited: