Corksport Downpipe or cat back exhaust?
- Thread starter satyr36
- Start date
protegerider
Member
- :
- Mazdaspeed Protege
save up and get a vibrant or perrin. somthing that is 3''. the corksport is 2.4'', definately not ideal for power gains on a turbo car.
KrayzieFox
Member
- :
- 01 MP3 Turbo
+1 .. if you're gonna spend the money, spend it only once and do it right the first time.
The Perrin is discontinued and the Vibrant has a cat. Neither are true 3" either as they shrink down to 2.5" to mate up with the stock s-pipe (Vibrant) or j-pipe (Perrin). The Corksport is catless, bolts right up to everything and is substantially cheaper. 2.4" is more than enough for just about everyone on these forums. Unless you're running a larger turbo at 10+ psi it's unlikely you will see a difference between 2.4", 2.5" or 3" with the exception of lost torque.
hotrocker89
Member
- :
- mazdaspeed protege
Which exhaust will give me better performance
Im trying to debate which exhaust will help me with performance and sound in my mazdaspeed protege is between the GHL Stainless Steel Turboback Exhaust System or the PERRIN Performance 3" Exhaust System which one you guys think is better?
Im trying to debate which exhaust will help me with performance and sound in my mazdaspeed protege is between the GHL Stainless Steel Turboback Exhaust System or the PERRIN Performance 3" Exhaust System which one you guys think is better?
they have options for a cat on th midpipe? or... huh?
Maxx Mazda
Contributor
- :
- Stock P5
I run the corksport setup on 24psi and it doesn't seem to choke me off any. I'll do a dyno pull open dp and see though.
No I just added a Vibrant SS high flow cat so I could be emissions legal and fit the rules for STX. Plus, I gained torque with the cat.
Britt
GHL. It's a true turbo back, the Perrin (which is discontinued) is only downpipe back. You'll get bigger gains with the GHL downpipe. Plus, it isn't that much more expensive.
Both will be loud.
Britt
shane02pro5
25ish_psi
- :
- New Caney TX
The dp is not on Corksports website anymore so i don't think it's available any more either.
Good luck finding either as they are both now discontinued. As suggested above, go for the GHL if you can find it.
Wagonbacker9
Member
- :
- 2004 'Hoe
GHL and Ion are the 2 ass kicking exhausts for this car, as mentioned, neither is in production anymore.... theres an ion setup (minus the DP) in the FS section right now... Corksport is a fine exhaust unless you're after like... 350+ whp, but drones a bit on the highway from what I've heard. There are, I believe, 2 custom DP's in the works right now (terbow is in charge of one, I forget the other.. timelines are kinda sketchy), and if you got ahold of one of those, you could piece together your own killer system with the help of an exhaust shop for cheaper than most off the shelf units, and have similar, potentially higher gains... assuming you go to a GOOD exhaust shop.
why would i need a GOOD exhaust shop? Just needs to be welded up so theres no leak aye?
Wagonbacker9
Member
- :
- 2004 'Hoe
if you mock it up yourself, then all you need is a good welder. if you're taking it to a shop to have them make the system themselves, I've seen some real crap come out when it was all said and done.. probably didn't flow even as well as stock..
Wagonbacker9
Member
- :
- 2004 'Hoe
you could just replace the cats on the midpipe with a strait pipe, if you can find a shop (most won't) or buddy to do it for you... and the restriction provided by the cat will then be gone... but for more gains, you want to replace more choke points... like the S and J pipes.
as for the downpipe, no.. the down pipe is made of of at least 3 seperate bends.. but I think that was just a misuse of the word.. (i'm only pointing it out to be clear)
New Posts and Comments
- Article
New Threads and Articles
-
For Sale Got tons of extra parts for mazda protege protege5 engine 2trans
- By JP mp5 VA
- Replies: 0
-
-