Can you add power locks to 2010 Mazda 3 Sport?

[csed3]

Any information on how to install the after market kit that is for cable style door locks?! (i.e. A 2007 mazda 3i)

you can get a universal 4 door power door lock kit. They run around $50 and up, depending on what you looking for. We have a cableing lock kit system, so this means we need an adapter for each door and they are only an additional $7 per door.

Entire kit is like $75+ shipping.
Autodax is the site im going through

 

[Maz94Protege]

Any information on how to install the after market kit that is for cable style door locks?! (i.e. A 2007 mazda 3i)

I purchased the kit and returned it, I didn't want to cut away the plastic weather molding behind the door panel between the door frame. On older style doors it might be easier, just learned to live with the manual locks.

I did see a "how-to" online with a 1st gen 3. Do a google search and see if you can find it.

 

[marilynjane]

OEM front door locks

Hey All! I was following this thread b/c I wanted to get power locks for my mother-in-law, but then changed my mind because I don't want to throw her in the middle of a car project =P Anyways, I already bought the OEM front door locks, and am looking to unload them. Spent 160$, but if you are interested in going the OEM route, I would be willing to sell for 150$ OBO. I think I am going to post in some other forums, and maybe do an eBay listing, so PM me if you are interested.

Thank you!

Marilyn

"If everything seems under control, you're just not going fast enough." - Mario Andretti

 

[Maz94Protege]

Hey All! I was following this thread b/c I wanted to get power locks for my mother-in-law, but then changed my mind because I don't want to throw her in the middle of a car project =P Anyways, I already bought the OEM front door locks, and am looking to unload them. Spent 160$, but if you are interested in going the OEM route, I would be willing to sell for 150$ OBO. I think I am going to post in some other forums, and maybe do an eBay listing, so PM me if you are interested.Andretti

What all do you have? Can you send me some photos? ill PM you my email

 

[Tale Gunner]

The link supplied does not work anymore.

Those are for the door switch. Green-yellow is the signal wire. Black-white is ground. The door latch assemblies that come with the car are exactly the same as the ones with power actuators except they are missing the "guts" (i.e. motors, shafts and gears) inside of them.

You can print all of the wiring diagrams from Mazda's online manual:

http://www.mazdatechinfo.com/index.asp?country=USA

 

[Tale Gunner]

They are the sensor for door closed to the main display.

hey guys,
I just bought a 2010 Mazda 3i manual transmittion with power windows but no power locks. I removed the panel from the front passenger side to take a look and noticed that there is a harness with 2 wires connected to what it looks like the door latch one wire carried around 4.4V and the other one was ground. I was wondering what were these wires for..and whether these actuators could be used for power locks or would I need new ones. Also if anyone had wiring diagrams, or know where to find.
thanks in advance
hegel

 

[OurOwnLexicon]

emailed onlinemazdaparts and this was the reply:

"You will need at minimum 4 new door latches (I have a kit for these in the "MISC ITEMS" catalog located on the lower right of the homepage. You will then have to get an aftermarket alarm system and wire it into these new door latches."

Awesome information, and decent price for the kit, (I believe it comes with the actuators as well, correct me if I'm wrong). My only other question is: Is it possible for the OEM flip key to work with an aftermarket keyless entry system???

(confused)

 

[This guy]

i am trying to get an alarm system installed but the guy thats doing tells me that the ACTUATOR should be original from mazda. is this true i dont wana spend 100 per actuator.

 

[shawlexwes]

emailed onlinemazdaparts and this was the reply:

"You will need at minimum 4 new door latches (I have a kit for these in the "MISC ITEMS" catalog located on the lower right of the homepage. You will then have to get an aftermarket alarm system and wire it into these new door latches."

Awesome information, and decent price for the kit, (I believe it comes with the actuators as well, correct me if I'm wrong). My only other question is: Is it possible for the OEM flip key to work with an aftermarket keyless entry system???

(confused)

I'm looking at this kit now. Did you purchase it? If so, did it include everything needed except for the aftermarket keyless entry system? Thanks for the info.