Camber kits question

[ONRAILS]

I have Megan Springs on my MS6 and the tires wore 10 times worse on the inner 2 inches of the tires. Is there a good camber kit that I can purchase that will alleviate this problem? Can you purchase a rear kit only, or should you buy both front and rear? Any of you have a kit installed on your car?

Thanks,

 

[tunersteve]

Front or rear?

Front camber requires new ball joints,and SPC makes adjustable ones for about $180 per set.

For the rear, the camber is adjustable via the inner eccentric bolts on the lower control arms.

 

[cpspeed6]

how much can be adjusted on the rear though? Like in my case for example, if you recall that pic I posted.

 

[tunersteve]

how much can be adjusted on the rear though? Like in my case for example, if you recall that pic I posted.

Specifically, I'm not sure. I know the alignment specs are pretty generous in the rear, so I would imagine around +-2 degrees. That's purely an estimate though.

 

[cpspeed6]

How's your negative camber after lowering Steve?

 

[tunersteve]

How's your negative camber after lowering Steve?

I'm about -2.5 on both rear wheels right now. I need to get the alignment checked after my rsb install since I had the rear springs out, and I'm going to request that it be dialed down to -1.5 on each rear wheel.

 

[cpspeed6]

Then I guess I'm doin ok at -1.6 on the rear.