ATTN: transmission guys/girls

[cl1ck]

I have a 1998 626 that was driveable when purchased, but now none of my gears are engaging. No reverse and drive.

I swapped the transmission and ECU but still no results.

Could this be the transmission itself or the transmission solenoid valve body?
note: transmission was purchased with warranty.

Tranny fluid levels were accurate but after test driving the new tranny, the levels rose after 2 miles of driving. I believe my tranny is good but my electrical systems are faulty.

Mods, techs, and mazda gurus this one's for you!

 

[msp5]

check the trans fluid, if it looks like it has a metalic look, id say its probally the trans

 

[CorkSport]

I have a 1998 626 that was driveable when purchased, but now none of my gears are engaging. No reverse and drive.

I swapped the transmission and ECU but still no results.

Could this be the transmission itself or the transmission solenoid valve body?
note: transmission was purchased with warranty.

Tranny fluid levels were accurate but after test driving the new tranny, the levels rose after 2 miles of driving. I believe my tranny is good but my electrical systems are faulty.

Mods, techs, and mazda gurus this one's for you!

You installed another transmission and the results were the same as the original?

Did you pull the codes from the ECU? A 98 model should be able to give them to you.

-Derrick