Anybody? MOMO Steering wheel

[Equinox]

Anybody yet figure out how to install a MOMO steering wheel on their cars? I don't know much about it, if it requires any of the hub adapters or what not, blah blah. I plan on getting this if I can get it on the car.

MOMO Jet series.

 

[ReMuXieD]

i've got a momo wheel
you need a hub
i did it myself, the only tricky part is disconnecting the airbag, i did it a dangerous way which is by just unplugging the plug under the steering coloum; this might sometimes set the bag off. but after taht everything is simple

 

[Equinox]

i've got a momo wheel
you need a hub
i did it myself, the only tricky part is disconnecting the airbag, i did it a dangerous way which is by just unplugging the plug under the steering coloum; this might sometimes set the bag off. but after taht everything is simple

Got a link to the hub adapter you got? I was under the impression there are different ones, I'm not worried about the airbag tho - I've disabled and removed more than a few.

 

[Pirana]

We need pics and part number for that hub adapter. It was my impression that they did not make a Mazda specific, and you would have to find one that fits.

 

[MP3#847]

Wheel/Hub

I just put and Issota steering wheel on my car with a MOMO hub. Any aftermarket steering wheel you will need a hub adapter for it. I was actually very easy to put in on took about an hour. The air bag was not hard at all either all you do is disconnect the battery there are 2 screws on the side of the wheel they have covers on them remove them and un do the 2 screws. The air bag will come right out and just unplug it. I will be posting pics of mine very soon to show you guys what is looks like...Any question Email me at Injen2k1Mp3@aol.com and I will be happy to answer any questions. I can get the part # for you guys. As well....

 

[kidkorrupt]

i used to want one but some of my friends lectured me on how it saved their lives so i'm sticking with the stock wheel.

when i'm done with all mods and i got major cash i'll buy a JDM wheel just for the little nardi emblem

 

[melicha8]

I think www.takakaira.co.jp has them look under familia of course. It seems to be the one thing they do have for our cars

 

[Equinox]

hey here it is, thanks for the link, anyone else make one? I wonder how bad the shipping is, since it's from japan, ugh. Probably like 100 in shipping.

http://www.takakaira.co.jp/asp/template.asp?cat=3&id=152&prodID=KLlHiIidfEgcjFecdDmJkjnKLlHIongegfkcdDHJIjnKLlHiIidfEgcjfFcdDmJmjnKLlHIKLlHiIidfEgcjfF

 

[ReMuXieD]

i'm not sure of the model # for the hub, but its a momo wheel and any shop can look thru the book & tell you which one to get
the hub works, but doesn't actually over the space entirely, with just about a .5 cm gap i'd say
i'm refering to where the hub attaches to the colum