Aftermarket Headunit Options that do it all?

Has anyone installed an aftermarket touch screen head unit that supports carplay, radio, heater and A/C controls and a backup camera? Aside from the original navigation unit which is dated and has a small screen, I have not seen any that are big enough to support this.

Any pics of your units would be appreciated. Attached is what my unit looks like and would like the new touch screen to cover this entire area.

2010 Mazda5
 

Attachments

  • IMG_6619.webp
    IMG_6619.webp
    70.4 KB · Views: 70
Did my '07 HU upgrade in '09 so hadn't looked into this... but I'm surprised to see iDatalink says it supports all that functionality! I get asking first, not wanting to risk it as it's turn into a $1000 pet project. As the kits usually leave the existing button/wheel A/C controls you'll be in custom territory to remove them... unless there's a kit for that now, but I haven't seen/found one.

You might get more feedback from the 3 forum, more cars = more chances someone has done this type of upgrade.
 
Upvote 0
Thanks! Just posted it to the 3 Forum!

 
Upvote 0
If your Mazda5 has separate controls for HVAC, why would you install a head unit that also does this? That being said, I have both a 2012 Mazda5 and 2015 Mazda5 into which we retrofitted new head units with touchscreens and backup cams, along with Android Auto/Carplay from Crutchfield.com. These kits included all the connectors, wiring adapters, and dash trim kits. Very good installation instructions.
2012 - JVC KW-M560BT (7 inch), Audiovox ACA800 backup cam
2015 - BOSS Audio Elite BE9ACP.XC (9 inch) includes backup cam
 
Upvote 0
JVC KW-M560BT (7 inch), Audiovox ACA800 backup cam
You are right. Makes no sense to have it control HVAC. I did see the ones in Crutchfield, but thr template they provide for my 2010 version is silver and the one in my car is black. I think I can just use the one I have and just cut it for the unit to’fit. Do you have pics of your installation?

Thank you very much for your response. Not many Mazda 5 owners out there!
 
Upvote 0
Hello, I did such installation before, see here.
My reply is not about choice of head unit, it's about mounting it in 1st gen Mazda5.
So, when I did that, I got myself a frame from here, link is dead, but there are plenty of those on aliexpress.
So, if you look closer, those mount holes exactly match the original metal stereo bracket used by original stereo, but you have to flip it upside down and use metal scissors to cut through sides if you're installing a "short" unit. As the saying goes "после сборки обработать напильником", which is "it's gonna fit if you put some effort into it".
As for the possibility to control AC unit via headunit (using CANbus, i.e., pjcan): yes, it's doable, but it's not worth the time spent on it, physical buttons are superior in any way to voice control even. And one less component to fail.
 

Attachments

  • 1753820553926.webp
    1753820553926.webp
    25.2 KB · Views: 1
Upvote 0
Back