2003 Mazdaspeed Protege Part Out (Racing Beat, Callaway, Kenwood, Mazdaspeed, OEM)

Hi all
This is my for sale thread for my brothers recently totaled 2003 Mazdaspeed Protege (#281 Black Mica). Here was the original thread, I'm just actually posting prices now and an update on whats available:
https://www.mazdas247.com/forum/sho...03-Mazdaspeed-Protege-Totaled-By-Drunk-Driver


Kenwood Sound System
Complete with most of the harness, 4 speakers, rear sub holder and amp, brackets and hardware, rear speaker blanks, kenwood deck. Fix the terminals on the amp that were bent in the accident and you're good to go.
http://imgur.com/d2faVON
http://imgur.com/F1f6E4G

UPDATE: harness, Kenwood Amp $OLD
All four door speakers $40
Kenwood deck $OLD
rear sub enclosure (no amp) w/ brackets $40 picked up?

Nearly Complete Interior
Rear seats including the bench, door panels front and back, side sills (front ones have mazdaspeed branding on the metal accent, rear ones dont), center console with cf accents, shifter surround, steering wheel (airbag deployed, but rest of wheel is good and color coordinated), Mazdaspeed branded speedometer with bezel, mazdaspeed branded front mats, rear mats (not branded), front seats

http://imgur.com/XWNtJ1v
http://imgur.com/gMg5sCq
http://imgur.com/tsc0Ivc
http://imgur.com/m6F8bl9
http://imgur.com/UYjMlSh
http://imgur.com/gxtm8pG

center console w/ shifter surround (the one with cf accents) $50
mazdaspeed branded speedometer w/ bezel $OLD
Speedometer Bezel (w/ alarm light) $FREE

Four door panels (CHERRY CONDITION) $OLD
mazdaspeed branded front mats + rear mats (not branded) $OLD
Both front seats $OLD
Rear bench w/ back seats $OLD


Racing Beat Front and Rear Sway Bars
Comes with REAR SUBFRAME ,and front subframe brace

Complete sway bar system front and back with rear sub frame and bushings! $OLD

Racing Beat Exhaust System $OLD
Full cat back and exhaust $OLD
Catalytic converter and sensor $OLD

Side Skirts and Rear Skirt
Body painted the same as the car, Black Mica. Bent front strut tower bar is free if you wanna try to bend it back to normal...
http://imgur.com/gmMltLW

Both Side Skirts $50
Rear Skirt $25
These skirts require enormous boxes so please let it be local to semi local pick up only!

Entire Rear Truck deck with Mazdaspeed badging and early type wing
http://imgur.com/QhMYrkM
$180 for the whole thing <--TOO BIG FOR BOX PICK UP LOCAL!

Engine Stuff
Callaway Turbo Manifold w/ Garret t25 turbo and down pipe. Still spins freely. All coolant and oil fittings included. Mazdaspeed branded heat shield. Manifold studs snapped so you'll need to have a machine shop extract and replace them
Injen MSP Intake w/ maf
MSP ECU
Mazdaspeed branded plastic engine cover (has a crack in it that can be easily fixed)

http://imgur.com/7QQgv9q
http://imgur.com/4l0Ko2k
http://imgur.com/KDkSjej
http://imgur.com/bvSThq0
http://imgur.com/V20tTAK
http://imgur.com/YlXSmw3

UPDATE: Turbo + housing and fittings SOLD
OEM Intake $50 + shipping
Callaway turbo manifold $225
Mazdaspeed heatshield $25
Callaway downpipe $50
Mazdaspeed plastic engine cover w/ crack in it $25

MSP ECU $100
Injen intake w/o maf $OLD

Extras
https://i.imgur.com/UwEi1tt.jpg
Front side markers FREE?

Driver side fog light $OLD
Sparco pedals $OLD
Sparco shift knob $OLD


Injen CAI Paperwork, licenseplate, registration card and sticker $10 bucks?
https://imgur.com/KBGBlJT

Mazda OEM front lower Air Deflector
https://imgur.com/TQ69sH7
https://imgur.com/Vrq2ejG
https://imgur.com/yClbdQk

Part Number:B30P519K1B Decent condition $20?

Autometer 3 pod gauge bezel for protege
http://www.autometer.com/2-1-16-triple-pillar-mazda-protege-00-03.html
Used and has two small holes drilled into it already but not really visible. $50
https://imgur.com/13Mzxk2
https://imgur.com/rRG4mkB
https://imgur.com/rucl2KG

Autometer Carbon Series Gauges
-Boost/Vacuum Gauge https://imgur.com/ZW4WJ8f P/N# 4701 $60
-Pryometer w/ temp probe https://imgur.com/hHUw035 P/N# 4743 + probe $150
-A/F Ratio Gauge (narrow band) https://imgur.com/jk3cFmd P/N# 4475 $60
More info here: http://www.autometer.com/gauges/carbon-fiber.html#1&profile=products
Comes with appropriate wiring and sensors if applicable. Wiring is obviously used but its mostly there and ready to use.
https://imgur.com/jOAhWMT



Prices are pick up and local pick up is not only welcome, its encouraged! Located in San Jose, CA. Otherwise, buy pays shipping and handling

Feel free to email me or PM me vitrium at gmail dott com
 
Last edited:
So I've been told my long list is confusing, especially when viewed on a small smartphone screen. So lets make it simple for those who can't parse information. Here is the stuff still available:


Kenwood Sound System
All four door speakers $40
Kenwood deck $20?
rear sub enclosure (no amp) w/ brackets $50?

Nearly Complete Interior
Four door panels (CHERRY CONDITION) $80 for all
center console w/ shifter surround (the one with cf accents) $50
mazdaspeed branded speedometer w/ bezel $100

Racing Beat Front and Rear Sway Bars
Complete sway bar system front and back with rear sub frame and bushings $300

Side Skirts and Rear Skirt
Both Side Skirts $50
Rear Skirt $25

Entire Rear Truck deck with Mazdaspeed badging and early type wing
$200 for the whole thing

Engine Stuff
Callaway turbo manifold $225
Mazdaspeed heatshield $25
Callaway downpipe $50
MSP ECU $100
Mazdaspeed plastic engine cover w/ crack in it $25

Extras
Front side markers $5 each?
OEM front lower Air Deflector (P/N:B30P519K1B) $20?
Autometer 3 pod gauge bezel for protege $50
Autometer Carbon Series Gauges:
-Boost/Vacuum Gauge (P/N# 4701) $60
-Pryometer w/ temp probe (P/N# 4743 + probe) $150
-A/F Ratio Gauge (narrow band) (P/N# 4475) $60
 
Last edited:
Interested in the Callaway turbo manifold
Also interested in the OEM front lower Air Deflector
 
Last edited:
Back