12.737@108.51mph

mrdouble99

Member
:
Mazdaspeed3
Octobre 2 2010

Napierville Dragway, Quebec

2009 Mazdaspeed3

Cobb Accesport - Cobb SF - CP-e rear engine mount 70 duro

Tune at 259whp@280wtq on a mustang Dyno by DrPat (acsp) on pump gas (94 octane)

Front: Toyo RA1 235/40R17@16psi - Rear Maxxis MAZ1 225/40R18@50psi

Outside temp: 59f/15c

RPT_20100925_SSPARound4T1I_136.jpg

1273410851.jpg

 
nice number!

where you got your car tuned exactly?I'm also from Montreal and would like a tune as well,thanx!
 
nice number!

where you got your car tuned exactly?I'm also from Montreal and would like a tune as well,thanx!

Call Pat from ACSP at 450-973-1666 and tell him Dan with the speed3 refer you.

Things to know before you go on the dyno is that you need a laptop with the latest version AccesTuner Race install on it, your MAF calibration need to be done and dont forget to 94 octane gas :)
 
Full interior?

59F is right around the sweet spot for the turbo on these cars.
 
Nice time :)

Mods ?

Intake, MM, DP, catted MP, FMIC, MBC @ 16psi, for power mods

Thats pretty crazy you only have intake, MM, and tune. whats your boost curve like?

Any wheel hop with the Toyo's? I was getting some reallllly bad wheel hop on the stock potenzas. From the looks of it, I should have spent the money on some DR's and an accessport, haha.
 
Peak at 20psi and stick at 18psi with an A/F around 12.4.

i'm preloading my launch (driveline) with the clutch, so with the RA1 at 16 psi i don't have wheel hop
 
Back