107 maps with old Accesstuner

[SallySpeed3]

Hey guys. Like the title says, I modified a 107 map with "the old" accesstuner, basically just calibrated the MAF and enabled flat foot shifting, no big deal. BUT, I noticed when putting onto my AP through the manager that it now registers as a 106 map. I'm wondering that since I used the old Accesstuner, would it get rid of the recent Max Load adjustments that Cobb did? I ask this because after doing several logs my Calculated Load always stays around 180 at wot, the only time it jumped over 200 was during a spike and it eventually dropped back down to 180. Maybe with my mods I'm not even ready to take advantage of Cobbs recent improvement, but I figured it was worth a question, thanks.

 

[ReNaToMS3]

Even some people that are stock have the load cap problem. With your mods, there is a very good chance that you have it too.

You gotta request ATR again so you have the latest version. If you change anything on the new maps with the old ATR, it won't work.

Make sure the AP and Manager are also updated.

 

[SallySpeed3]

Yeah thats what I figured. I put in the request a couple days ago and haven't received anything in my e-mail, so I'll just keep waiting. Thanks for the reply.

 

[Speed3Rookie]

Yeah thats what I figured. I put in the request a couple days ago and haven't received anything in my e-mail, so I'll just keep waiting. Thanks for the reply.

that's not normal to wait 3 or more days. have you checked your junk email?

 

[COBB Tuning]

SallySpeed, Are you still waiting on ATR? If so, please send me a PM and I will see to it that you get a copy ASAP! rememebr to include your exact year, make and model of vehicle, your email address and your AccessPORT serial number.

Travis
COBB Tuning

 

[SallySpeed3]

Travis,

Thanks for the concern. I did receive it. I called yesterday and it turns out my e-mail provider which is through work wasn't even letting it into my junk e-mail, so I had you guys send it to another e-mail that I normally don't use. Thanks tho!