Search results

  1. C

    Timing Curve

    Hey Steve - Here's a Cliff's Notes version of my E6X timing table: This is for a MSP (CAI, FMIC, 60mm D/P, and 3" cat-back) running stock injectors and stock boost. -Shawn
  2. C

    Timing Curve

    Steve - On the E6X, the timing for my MSP at 6K rpm and 7.5psi is 21 deg. and at 6.5K rpm and 7.5psi is 23 deg. -Shawn
  3. C

    My MSP sux the cruise control broke!!

    I'll tell you what your problem is....it's your muffler bearings....they need to be replaced.
  4. C

    Anyone have pics of RX8 rims on a Protege???

    Guys - RX-8 wheels have a 50mm offset. -Shawn
  5. C

    DGM carbon fiber front lip on 03.5 MSP?

    Black Majic MSP - The side grille inserts are part of the stock front air dam and cannot be used with the DG piece. mattybo - The DG piece fits very tight around the bumper. I didn't have to modify the bumper at all. The paint matches the car perfectly (this is entirely dependent on the...
  6. C

    DGM carbon fiber front lip on 03.5 MSP?

    Black Majik MSP - Here's my car with the DGM C/F Front Air Dam: You must remove the stock 03.5 front air dam in order to use the DG one. -Shawn
  7. C

    Need help with Greddy Type-S...

    That piece is a breather for the BOV. If it's capped off, the BOV will not function properly. -Shawn
  8. C

    Need help with Greddy Type-S...

    Do not cap that off. The GReddy BOV manual states that it should be left open to the atmosphere. -Shawn
  9. C

    intercooler

    Dom, What is the size of your turbo's compressor outlet? Use 2.5" from the I/C to the T/B. -Shawn
  10. C

    intercooler

    Hey Domino - Check the Summit Racing Online Store for Mild Steel Mandrel Bends: http://store.summitracing.com/product.asp?d=8&s=90&p=766&searchtype=ecat Check NAPA's online store for T-Bolt Clamps...
  11. C

    MSP RH Offset?

    Hey guys, The MSP wheel has a 55mm offset. -Shawn
  12. C

    How to wire up Haltech e6x??? Juan Help!

    Bryan, Give me a call. I'll help you out. -Shawn
  13. C

    Anyone know the tooth count for the cam and crank sensor (msp)

    [Ed McMahon] Your are correct, sir. [/Ed McMahon] We have 36-1 trigger wheel and a Motronic trigger. -Shawn
  14. C

    Quick question--need quick answer

    Don't do it yourself. Use your warranty.
  15. C

    I dyno'd my MP3 with out knock!

    StuttersC - Good job dude. However, your AFR is waaay too lean for a boosted car, especially a MP3 with its advanced timing. Do you have the Pierburg Aux. Inline Fuel Pump yet? If not, get it and adjust the adjust the RRFPR so that a 12:1 AFR is achieved from 3K to redline. Once you do...
  16. C

    A'PEXi USA needs a MSP to prototype new parts

    Hello Everyone, I just got off the phone with Wen Lai at A'PEXi USA and he asked if I could make this annoucement: They are planning to prototype new parts for the MSP (sorry I don't have details). Anyone with a stock MSP in the Orange, CA vicinity should contact Wen at (714) 685-5700 for...
  17. C

    Throttle body size

    BinaryRotary - You will need to use a 2.5" coupler. -Shawn
  18. C

    Correct tire Pressure

    TX Speed Demon - Factory recommended cold tire pressure is 32 psi front and rear. The side of the tire shows the max. psi the tire can be inflated when cold before becoming unsafe. -Shawn
  19. C

    Drag P5

    Equinox - -Shawn
  20. C

    New Innovative Turbo Manifold for the FS Engine

    Hey Guys - More info. can be found here. -Shawn
Back