MSP RH Offset?

[ONRAILS]

Does anyone know what the stock offset is on the RH's for the MSP?

 

[MazdaManic5]

50offset

Does anyone know what the stock offset is on the RH's for the MSP?

 

[ForceFed]

50offset

CORRECTAMUNDO!
It is a +50 mm offset on a 17 by 7 rim.
Matt

 

[ONRAILS]

CORRECTAMUNDO!
It is a +50 mm offset on a 17 by 7 rim.
Matt

Damn! Good think I didn't order the wheels yet... I was thinking they were more like 40mm.

 

[Chojin]

Hey guys,

The MSP wheel has a 55mm offset.

-Shawn

 

[ForceFed]

Hey guys,

The MSP wheel has a 55mm offset.

-Shawn

Not according to the casting in the rear of the spokes.It says 50mm.
I have checked it many times.Someone else said that theirs said 55mm in the spoke but I know for a fact that mine say 50 mm.
I dunno?
Matt

 

[MazdaManic5]

could it be possible the 03s have a 50 and the 03.5 have a 55offset? Justa thought. Ive seen weirder things from a car. I have always been told 50mm was the offset.

 

[rowan]

Someone post pics, and state whether it is an 03 or 03.5 rim .. and end this.

 

[girth]

The 03s and 3.5s are all +55 like Chojin said.

Here is a pic of my 03 rim:

 

[PFUNK5]

s***! Will these fit on a P5 with an almost 2 inch drop (TEIN S-TECH springs), and on the stock tires? (I think 215-45-17) Damn...I might be getting new wheels soon...I mean I know the 215/45/17 will rub a bit when I turn the wheel all way 360*, but the offset of 55?


Help help help!

 

[girth]

I don't know PFunk....I think the 215/45 tire would be a bit too big. I wouldn't chance it to be honest. Rubbing sucks.

 

[INiTiAL33]

Just out of curiousity... will the MP3 RH fit the RSX?

 

[girth]

Just out of curiousity... will the MP3 RH fit the RSX?

As far as bolt pattern goes, yes it will fit. I have no clue about what the stock Acura offset or centerbore is though.

 

[Swerny]

Isn't the RSX 5 X 100 ? How would it fit?

 

[rowan]

Rock on Girth. Thanks for the pic. Misinformation sucks. Now we just need ForceFed to get a pic of his 03.5 rims

The rims will fit a P5 fine. You might need smaller tires though.

Yes MP3 and MSP wheels will fit an RSX. But you'll need a 3 mm centering ring. And the offset might be a little high...

 

[INiTiAL33]

Rock on Girth. Thanks for the pic. Misinformation sucks. Now we just need ForceFed to get a pic of his 03.5 rims

The rims will fit a P5 fine. You might need smaller tires though.

Yes MP3 and MSP wheels will fit an RSX. But you'll need a 3 mm centering ring. And the offset might be a little high...

i have no knowledge of offset or whatnot.... is the 3mm ring for the offset?

the RSXs have a 5x114.3 bolt pattern same as us.

 

[rowan]

RSX centerbore is 64.1 mm
Protege centerbore is 67.1 mm

Hence, the 3 mm centering ring.

 

[INiTiAL33]

RSX centerbore is 64.1 mm
Protege centerbore is 67.1 mm

Hence, the 3 mm centering ring.

how much are the rings?

 

[ForceFed]

The 03s and 3.5s are all +55 like Chojin said.

Here is a pic of my 03 rim:

Thats pretty disturbing?
Mine say 50 in the same spot?
I dunno?
Matt

 

[ForceFed]

Rock on Girth. Thanks for the pic. Misinformation sucks. Now we just need ForceFed to get a pic of his 03.5 rims

The rims will fit a P5 fine. You might need smaller tires though.

Yes MP3 and MSP wheels will fit an RSX. But you'll need a 3 mm centering ring. And the offset might be a little high...

Sorry bud ,but i have a spicy 03.
I dont get it and if i had a digi-cam i would in a heartbeat run out and crawl under my car to get a pic.I have checked it like 4 different times because i could never remember but mine say 50.I really dont get it?I am lost on this one?There has to be two different offsets out there on the RH's but that would make absolutely no sense to me.
I'm lost
Matt