Mazdas247 Marketplace

Hey everyone, So I have two items that I would like to get rid of because I no longer have a use for them. Willing to ship to United States only. Hopefully I meet all of the Rules and Guidelines for selling items. Trunk Cover: Reduced to $75) SOLD 2002 Protege5 Center Console Cup Holder WITHOUT BLACK BEZEL: Reduced to $15) SOLD Shipping is built into the prices listed above because they will be shipped via USPS. The cost of a box for the trunk cover is $12.50 and the estimated shipping cost is around $15.00. So the cost of shipping could be close to $30 which is in the price listed above. The cup holders estimated shipping cost is around $7, but I need to purchase/find a box for it so I may make less profit on that. How the...

(smash)SOLD!(smash) Going to miss her... _______________________________________________________________ For sale is my 2003 Laser Blue Mica Mazdaspeed Protege. Production #2733. Asking $6,000 obo! w/ 68,000 miles garage kept... Many pictures and videos down below! ALL PARTS LISTED BELOW WILL GO WITH THE CAR IF IT SELLS! I also have the stock front lip and stock 8" sub system! Gathering interest, serious only please!! Car is located in Houston, Texas 77044. Cash in hand for test drive. Whoever gets this car will be extremely pleased. I'm the original owner of this vehicle and will be very sad to see it go. Feel free to CALL or TEXT! 954-263-6848... If I do not answer, leave a voice mail, please! I will do my best to answer any...

FS: 2 Nitto NT-555's in stock wheel size 8/32nds tread For Sale: 2 barely used Nitto NT-555 tires. 8/32nds tread left on them basically new. Only had them on for 2 months before getting a new wheel/tire setup. List Date: 12/30/2013 For more info, click here to view the original listing: FS: 2 Nitto NT-555's in stock wheel size 8/32nds tread -------------------------------------- On Sale For: $159.27 + $30 Shipping -------------------------------------- Mobile friendly version: FS: 2 Nitto NT-555's in stock wheel size 8/32nds tread

FS: 2008 Mazda Speed 3 built. It is built with a lot of add-ons. Nice and clean and ready to go! - SOLD FS: 2008 Mazda Speed 3 built. It is built with a lot of add-ons. Nice and clean and ready to go! This car is beautiful and has been all blacked out. It is powered by a 2.3L Turbo Charged Four Cylinder with a six speed. It is creating around 25 lbs of boost and has no problem keeping you pinned to the seat. There have been a ton of installed upgrades including a stage 3 act clutch, B.R. racing suspension, GT Spec 4 stabilizer bar front and rear, dash hawk engine monitor, 18" Enkei wheels, front mount intercooler, Injen cold air intake, cobb turbo inlet pipe, turbosmart blow off valve, boost gauge, aftermarket front and rear...

Clean 2007 True Red Mazdaspeed 3 Clean 07 MS3 for sale. No dents, a few dings here and there and a clean interior. Has CP-E upgraded rear motor mount and CS intake with TIP. Car has 68.5K miles on it (mostly highway) and runs strong! Text or email for more info. 3232757402. Cash and local pick up only. Thanks! List Date: 1/3/2014 For more info, click here to view the original listing: Clean 2007 True Red Mazdaspeed 3 -------------------------------------- On Sale For: $12,500.00 --------------------------------------

FS: Mazdaspeed 3/6/CX-7 Valve Cover Up for sale is a good condition (albeit dirty) Mazdaspeed 3 valve cover. This valve cover came off my car, but it will fit any of the speed 3, speed 6, or cx-7 family. I purchased a used valve cover a few months ago and then got it powder coated, and then swapped it on to my car and then took this off to sale (almost like a core charge). I did this because I daily drive my car and couldn't afford the downtime. I highly recommend doing the same for any people that can't afford the down time. If you want to get yours painted or powder coated, or just want an extra valve cover, this will be perfect for you. Extremely hard to find! Located in Roanoke, VA and need this gone as soon as possible! $140...

FS: OEM Mazda2 springs, shocks, muffler/exhaust Mazda2 OEM shocks/ springs/ muffler/ and exhaust pipes. pm me for details or questions. Didn't list a price because I'm not sure if I can sell all in bulk to save on shipping or individually. PM me if interested. Looking for $120 for shocks and springs together $100 for full exhaust ( muffler and cat back pipe) includes tip OBO ONLY BUY NOW IF WE HAVE DISCUSSED SHIPPING AND FINAL PRICE List Date: 10/18/2013 For more info, click here to view the original listing: FS: OEM Mazda2 springs, shocks, muffler/exhaust -------------------------------------- On Sale For: $200 --------------------------------------

White face gauge cluster (instrument panel) available plastic covering is in decent condition, everything works odo shows 29X,XXXkms 75 obo+shipping from BC or WA so dont worry about international costs or any of that

Please send money to my paypal at mcdady099@verizon.net 01-03 Mazda protege passenger side taillight- 25 shipped brand new prosport 52mm mechanical boost gauge-40 shipped 01-03 brand new short shifter- 40 shipped 99-03 protege steering column gauge pod- 40 shipped 01-03 brand new protege dx/es/lx/se front bumper lower grill( will not fit p5 or mazdaspeed)- 25 shipped

Looking to start selling some stuff off the P5 before I put the car up for sale in January. I am willing to accept trades as well, as long as its not anything for a protege. I am willing to ship at buyers expense 2 2mm universal spacers $20

Have a few items for sale that I have no use for at the moment pics are couple days old hope this isn't a problem Scosche double din kit for Ma1541b it didn't fit my msp tho could fit with a little trimming of the dash (bout 1/8th inch on each side) -$12 shipped to the us brand new Fender marker lights used $SOLD Corksport rear motor mount inserts $40 shipped brand new Apexi N1 muffler $80 picked up (shipping would be outrageous) used 9003 hid bulbs 10000k low beam hid high beam halogen-35 shipped new in the box

Panavise mount [Please Lock] Mount has been spoken for

used condition works perfectly had a flange professionally welded on and had them install the bov as well. Totaled my MSP so that's my reason for selling ill take 60 bucks for it shipped I will also be adding a split second afc As well, and I'll price that at 200 with the software and I'll post pics up today of that and it also has the cord for a computer to hook up to it

Items SOLD! I have the following for sale: 1) Protege5 Cargo Net - $20 shipped 2) AntennaX OEM Style (7-inch) Antenna for Mazda CX-7 (Perfect fit for Protege5 stubby look) - $10 shipped

I have a set of front and rear corksport motor mount inserts and a corksport 3rd link bushing kit. I'll let both go for 80 bucks shipped! Both the inserts or the 3rd link bushing kit have never been installed. Normally these go for 97 bucks plus shipping.

FS: K&N Typhoon Intake For sale, used K&N Typhoon Intake. Used for about 20k miles before going 3.5 intake. No tune needed for this intake because of stock size MAF housing. List Date: 12/30/2013 For more info, click here to view the original listing: FS: K&N Typhoon Intake -------------------------------------- On Sale For: $106.18 + $20 Shipping -------------------------------------- Mobile friendly version: FS: K&N Typhoon Intake

FS: Mazda5 mugen style rain visors 2006 up Mazda5 mugen style window visor, full set. Needs new double sided tape but otherwise good condition. These are the ones that sit tight on frame, not the standard ones that are bulky. List Date: 12/29/2013 Location: Laguna Hills, CA, United States For more info, click here to view the original listing: FS: Mazda5 mugen style rain visors 2006 up -------------------------------------- On Sale For: $75 (Local Pickup Only) -------------------------------------- Mobile friendly version: FS: Mazda5 mugen style rain visors 2006 up

For sale is my 2003 black mica mazdaspeed protege. I have put some work into the car but nothing extreme. I was recently in an accident which damaged the back driver side of the car(pics show). The car only has 74k miles on it and a brand new SMIC and Corksport downpipe, and hardpipes. I also have a Catless full turboback Corksport exhaust on this car with about 10k miles on it. Still in great condition. The alternator was also recently replaced. Because the car is about 10 years old now and the labor cost for fixing the car was double the value of the actual parts to fix the car, the insurance decided to total the car. The Auto shop that I was going to have fix the car has already ordered all of the parts to fix the vehicle and added a...

Mazda CX-5 Custom Coverking Leatherette Front and Rear Seat Covers Beautiful, nearly brand new Mazda CX-5 custom Coverking Leatherette Seat Covers Front and Rear Seat Covers Purchased 3 months ago for $525. Will let it go for $400 + free shipping (http://www.carid.com/2013-mazda-cx-5-seat-covers/coverking-seat-covers-2942608.html) Color: Red/Black Front Covers include: Bucket seats, with removable headrest, with power driver's side seat, with manual driver side lumbar, with side airbags Rear Covers include: 40/20/40 bench seat, with 3 adjustable headrests, with armrest List Date: 12/29/2013 For more info, click here to view the original listing: Mazda CX-5 Custom Coverking Leatherette Front and Rear Seat Covers...

Carbon Fiber custom gauge pod (3 gauges) 60mm Carbon Fiber custom gauge pod (3 gauges) 60mm - direct fit replacing standard center dash piece (RED and BLUE CF) List Date: 11/7/2013 For more info, click here to view the original listing: Carbon Fiber custom gauge pod (3 gauges) 60mm -------------------------------------- On Sale For: $514.93 + $0 Shipping --------------------------------------