Mazdas247 Marketplace

2005 Mazda RX8 TPMS Sensors I am selling 4 TPMS sensors that were equipped in the wheels I bought for my Speed6. They are from a 2005 RX8. According to the seller they were functioning when removed. May work with other models. Selling with no warranty. List Date: 1/23/2014 For more info, click here to view the original listing: 2005 Mazda RX8 TPMS Sensors -------------------------------------- On Sale For: $70.00 --------------------------------------

Street Gear 16x7 wheels and T1R tires One set of street Gear Black Widow wheels and tires. Wheels are 16x7 4x100 pattern. The wheels were run for 1.5 summer seasons. (maybe 20k kms) The Toyo T1Rs were brilliant on this car. These tires are at 1/32 and 2/32 (2 each), so i wouldn't recommend running them on the street, but they'd be pretty sweet to kill on a lap day. They were sticky as hell and I loved them to bits. Wet traction was great back in the day. The wheels are 18lbs. Not super light, but lighter than the OEM Yozora rims by about 3 lbs. Looked really sweet on my black 2. There are a couple of scuffs that i touched up on ONE wheel. See close up shots. They could use another bit of clear coat, but they're...

EBC front rotors for Mazda2 Replacement rotors from Mazda2. These were purchased new and installed on the car temporarily for less than 3000kms before they were replaced with slotted. Tons of life left in these. No scoring. Local pickup. I'll ship if you really want, but these are pretty heavy, shipping will likely be prohibitive. List Date: 7/1/2013 For more info, click here to view the original listing: EBC front rotors for Mazda2 -------------------------------------- On Sale For: $75 + $0 Shipping --------------------------------------

Rota Grid 18x9.5 Hyperblack. FS is a set of Rota Grid 18x9.5 in Hyperblack with Nitto NT01 Compound tires in the front (225/40 r18) and Nitto Gen Sport tires in the back (215/40 r18). Tires with less than 1000 street miles. As you can tell by the tread left. You should have no problem getting another 10k miles out of them. Street use only so zero heat circle on the compound tires. I did not clean them up to make them look new so there are a bit dirty on them. Nothing to major except for some daily wear. The price is 850 obo. Prefer pick up. Will ship on buyer's expense. List Date: 2/12/2013 For more info, click here to view the original listing: Rota Grid 18x9.5 Hyperblack. -------------------------------------- On Sale For: $850...

Hi, I sold my protege last summer after buying a 135i. I still have some parts in my closet. I'll post them as I find them. So far... New, never installed AWR rear mount 88 duro $75 Shipped

FS: Catless 3" Downpipe For Sale: Used Catless 3" downpipe. Has a small hairline crack on the bellmouth which is shown in the picture. Can easily be welded for around $20 at any muffler shop and reused for a cheap downpipe alternative. I made good power with this and only used for 1 year. List Date: 12/30/2013 For more info, click here to view the original listing: FS: Catless 3" Downpipe -------------------------------------- On Sale For: $100 + $30 Shipping -------------------------------------- Mobile friendly version: FS: Catless 3" Downpipe

Cobb SRI for Mazdaspeed 6 Cobb SRI for the Mazdaspeed 6 with all parts including the mounting brace and the installation instructions. Works fine, but I upgraded to a 3 inch intake. Shipping included to lower 48. List Date: 1/4/2014 For more info, click here to view the original listing: Cobb SRI for Mazdaspeed 6 -------------------------------------- On Sale For: $95 + $0 Shipping -------------------------------------- Mobile friendly version: Cobb SRI for Mazdaspeed 6

DO NOT include shipping and handling, PM for full price quote PAYPAl Only, unless picked up cash only. Everything is sold as is! I can take and PM pics if requested. Stock MSP down pipe (s-pipe): $80 shipped inside the US vai USPS Flat rate w/ issuance. Its been sitting on my workbench for about 6 months. Its in good working condition. Has a bit of rust on surface. Studs appear to be in acceptable condition but one is missing a nut. but Id recommend to changing the hardware though. P5 Calipers: SOLD Protege5(5 speed) Radiator: SOLD Tubular stock replacement Turbo exhaust manifold: SOLD

17" Mazda Wheels & Tires (from 2010 Mazda5) 4 Stock Aluminum 17" Wheels and tires from 2010 Mazda5. Tires have 25K miles on them. One rim has approx 2" scuff on lip (not on seal). List Date: 12/16/2013 Location: Weymouth, MA, United States For more info, click here to view the original listing: 17" Mazda Wheels & Tires (from 2010 Mazda5) -------------------------------------- On Sale For: $450 (Local Pickup Only) --------------------------------------

turbo kit for 1.6L ZM - protege 3rd gen turbo kit for 1.6l ZM engine found in 3rd gen protege. includes: - '99 intake manifold (without EGR valve) - Turbo Specialties Turbo exhaust manifold - Brand new genuine Garrett GT2554R Turbo (same model found in Mazdaspeed Protege) - RX7 low impedance injectors (not a direct fit, will need an injector driver or some resistors installed inline) - intake and exhaust manifold gaskets - oil return hose and fitting - oil pan with oil return fitting installed (not pictured) - a few fittings required for oil and water lines to be installed aside from fuel management system and downpipe, this kit is nearly complete. shipping cost is a rough estimate from Montreal to Los Angeles.. would vary wildly...

Koni FSD Struts/MS3 Springs, MOOG F+R Endlinks, NGK TR6IX plugs, Street Unit RMM Hi All, I am selling some brand new parts and some parts are in used, but in great condition. This was for a 2005 Mazda 3, which should fit 2004 to 2009 also. Assembled set of Koni FSD with Mazdaspeed3 springs with 20k miles - $325 plus shipping Brand New NGK Iridium IX (TR6IX) spark plugs - $25 shipped Thanks! List Date: 6/8/2013 For more info, click here to view the original listing: Koni FSD Struts/MS3 Springs, MOOG F+R Endlinks, NGK TR6IX plugs, Street Unit RMM -------------------------------------- On Sale For: $106.32 + $20 Shipping --------------------------------------

FS: '07 mazda3 Tien gold lowering springs Up for sale is a set of Tien gold springs from a '07 mazda3 hatch. It should fit other years so please make sure before buying. I bought them for a Mazda5 but never put them on. Been sitting in storage while I was in Japan. Check my other items. List Date: 12/29/2013 Location: Laguna Hills, CA, United States For more info, click here to view the original listing: FS: '07 mazda3 Tien gold lowering springs -------------------------------------- On Sale For: $100 (Local Pickup Only) -------------------------------------- Mobile friendly version: FS: '07 mazda3 Tien gold lowering springs

I figured I would post this to see if anyone would be interested in Raceland coilovers if they made them for our cars. The process isn't that difficult. We just need anyone interested to email Raceland and simply let them know that we are interested. I know that the Hyundai Tiburon community did this same thing and Raceland was making coilovers for them in no time. If you are interested please email dclarke@racelandus.com Post on this thread after you have emailed them and I will add a list of everyone to the op. Emails sent to Raceland: 1) Majyk 2) tyman108 3) aleclahaie 4) kibl34

FS: Mazdaspeed air filter Mazdaspeed air filter element. Got it for a mazda 5 2.4L but never used. Has everything in picture. List Date: 12/29/2013 Location: Laguna Hills, CA, United States For more info, click here to view the original listing: FS: Mazdaspeed air filter -------------------------------------- On Sale For: $25 (Local Pickup Only) -------------------------------------- Mobile friendly version: FS: Mazdaspeed air filter

Selling my CDN MSP cluster Reads 199xxxkm on the odometer when pulled Came out of a canadian car Ships out of Hamilton Ontario $80 + shipping + paypal fees I accept paypal Either pm me or email direct at [removed]

MSP 2003 Unichip PNP Unichip PNP was purchased for $699.00. Car was wrecked before chip arrived. Comes with boost controller and 3 switches. Boost: stock or 10psi. Timing: stock or advanced. ECU reset. Pre mapped for 2003 MSP with intake and exhaust. Sold as is. Brand new in box. List Date: 1/13/2014 For more info, click here to view the original listing: MSP 2003 Unichip PNP -------------------------------------- On Sale For: $520.00 --------------------------------------

FS: Mazdaspeed Part Out (access port, intake, forge) First thing is a Cobb Accessport The screen still has the screen protector on it, which shows signs of wear. I just peeled it back to check and the actual screen is perfect. No imperfections. Very minimal wear, if any at all. Dongle is in good shape. Only used to flash a tune, do minor data logging and minor ECU adjustments. ***WAS uninstalled prior to trading the car in*** It is ready to go to a new home. Comes with accessport, cable, dongle, original install cd, box, and sick license plate frame so everyone knows you're COBB TUNED BRO.. Cobb price - $600, Asking $450 sold. Shipped. Received. Second thing is a Cobb SF intake - maybe used for 10k miles, tops. There is virtually no...

2006-07 Mazdaspeed6 Front Bumper Cover This bumper cover has some damage. The notable damage is a crack at the bottom, a few spots of paint that came off around the fog light housing, a mounting tab on the bottom was torn (REPAIRED with epoxy), and the little mounting ring where the top passenger edge of the cover mounts to the fender is torn (which I didn't notice when I was repairing other parts of the bumper or else I would have plastic welded it also). I plastic welded the crack from the back side and covered the damaged paint with Mazda touch up paint. It is still a little uneven at the crack, but it is strong. There are also some other assorted rock chips in it from daily driver status. This is obviously not a perfect...

I have a mp3 for sale as is or for parts car has bad motor email me for pics [removed]

I have a few amps and speakers finally have a free moment to list these... Everything has a price but is best offer, just make it worth while me running to drive to fedex! Please pm zip with offer. I ship with 2 day air (I get a shipping discount so 2 day is same as ground for me) I have two (2) stock subs and amps and speaker box decks for the MSP! (I took mine out and replaced with something else soon as I bought the car, and my buddy did the same. So he just gave it to me cause it wasn't worth him trying to sell) 2x MSP Kenwood Speaker Decks $50each (I do not have the brackets, sorry. But the +pos & -neg cables are still there) Decks <click> 2x Kenwood Subwoofers: KFC-WR/UM3, 8 ohms, 125 watts. (one is foam cone, one is rubber...