Mazdas247 Marketplace

Used HKS SSQV blow-off/bypass valve kit, specific to Gen 1 Mazdaspeed3 and CX-7 (not sure about Gen 2 MS3). Price: **SOLD**

Hello, I have a used KMR front and rear strut bar. Price $150 Shipped for both.

HPFP OEM Internals Used OEM HPFP internams used for MLZ[\\X][BB\]NLLBB[X\HY]HY[[\[VOMVTZX^\ K[K\YYY MP\MQ[\[ MPY MQZ[[KZ[\[LMLRSH[\[TVVWCBKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKCBVOMWS[HILH IL\[VVWCBBTZ\YYY[KX^\ \[[[KZ[\[LML\\WVSQZ\YYY[K[Y^[]SQVTCBKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKCBSQZ\YYY[KK\]XXSSLMLMKMI[\]L MI[\]\KI[\]\Q[UXY[ [\ZYSSQCBBTZX^\ K[K\YYY MP\MQ[\[ MPY MQZ[[KZ[\[LMLVSQZ[KVTSQVTCBBTZX^\ K[K\YYY MP\MQ[\[ MPY MQZ[[KZ[\[LMLVSQZ[KQLXQMLSQVTCBBB

Axxis Ultimate Ceramic Brake Front Pads 109.06370 Beck Arnley 088-1471C MAZDA Protege, 626, MX-6 Axxis Ultimate Ceramic Brake Front Pads 109.06370 Beck Arnley 088-1471C MAZDA Protege, 626, MX-6 Selling 4 sets of the Axxis Ultimate Ceramic Front Brake pads. Bought them a while ago and never used them. $23 shipped. PRICE IS PER SET. Made in Australia. The following are the part numbers: Beck Arnley: 088-1471C Axxis: 109.06370 List Date: 3/19/2013 For more info, click here to view the original listing: Axxis Ultimate Ceramic Brake Front Pads 109.06370 Beck Arnley 088-1471C MAZDA Protege, 626, MX-6 -------------------------------------- On Sale For: $23 + $0 Shipping --------------------------------------

Ground Control Coilovers Originally purchased for a car which I sold before getting to install them. These are brand new still with original box, only taken out of the box to inspect them. These retail for $450 + shipping. I will let them go for $250 Again, these are brand new! Used sets of these go for ~200. These will fit 99-03 protege, protege5 and mp3. List Date: 8/4/2013 For more info, click here to view the original listing: Ground Control Coilovers -------------------------------------- On Sale For: $213.13 + $40 Shipping --------------------------------------

DNP V2 Exhaust Manifold for mazdaspeed 3 and 6. Dnp exhaust manifold Version2 with the heavy duty supports. Great manifold! I purchased manifold with minor repairs. Manifold is in good shape and works great. It helped me to get over that 360hp hurdle. List Date: 10/16/2013 For more info, click here to view the original listing: DNP V2 Exhaust Manifold for mazdaspeed 3 and 6. -------------------------------------- On Sale For: $237.62 + $20 Shipping --------------------------------------

Anyone that has any interest in these parts, know what they are. The new bits are the rad hose, thermostat and the oil filters. Everything else has 150k miles on it.

07-13 MS3 Go Fast Bits Respons Hybrid BPV/BOV In excellent condition, INCLUDES gasket as well. I've tried about 5 different types of bpv, bov, and hybrids, and I've found this to be the best overall performer + ease of tuning. Asking $200 shipped. Details and Specs Here: http://www.jscspeed.com/catalog/Mazda/07_13_Mazdaapeed3/Blow_Off_Valves/Go_Fast_Bits_Respons_Bypass_Valve_for_07_13_Mazdaspeed3.html List Date: 2/16/2014 For more info, click here to view the original listing: 07-13 MS3 Go Fast Bits Respons Hybrid BPV/BOV -------------------------------------- SOLD --------------------------------------

Brand New Corksport Lowering Springs for 2007-2009 Mazdaspeed3 A set of brand new Corksport Lowering Springs for gen one Mazdaspeed3. I never got around to installing them but I'm selling my MS3. Pls txt me (314) 329-1516. Serious buyers only. List Date: 8/3/2013 For more info, click here to view the original listing: Brand New Corksport Lowering Springs for 2007-2009 Mazdaspeed3 -------------------------------------- On Sale For: $175 + $20 Shipping --------------------------------------

Hey y'all, I have these for sale, because when I did my research, most VF22 turbos have 10mm banjo bolts...sadly mine are M12...not M10....ugh!!!! The frustration. So for the mean time I have to run rubber hoses until I sell these and get the correct size banjos and banjo bolts. As for the oil return, I accidentally ordered 2. First thing up: Fragola -10AN Steel Oil Return fitting.(for welding to oil pan) Asking - $10 shipped Next, I ordered these from Techna-Fit. These were custom made length. They are the perfect length to fit these to the hoses running off of the coolant hoses from the throttle body to cool down your water cooled turbo. (Thats if you are running a water and oil cooled turbo). 20" -4an braided steel hose with...

Denso ITV-22 Used for 500 miles. Plugs still in very good condition. Sold the car and pulled the plugs out. List Date: 2/11/2014 For more info, click here to view the original listing: Denso ITV-22 -------------------------------------- SOLD --------------------------------------

Stoptech Rear Rotors Mazdaspeed3 Brand new in box. Bought planning to install on my 2010 Mazdaspeed3, but sold the car before doing so. Having blanks for rear rotors will give the best initial bite, better than drilled/slotted. Front rotors are best for having slotted for heat dispersion, whereas rears do not suffer as much from overheating. Contact me for shipping quote due to the items weight. List Date: 2/11/2014 For more info, click here to view the original listing: Stoptech Rear Rotors Mazdaspeed3 -------------------------------------- SOLD --------------------------------------

Hawk HPS Mazdaspeed3 Rear Brake pads Brand new in box. Ordered planning to install on my 2010 MS3, but sold the car before I did. Due to restocking and shipping fee it was not worth me returning them. List Date: 2/12/2014 For more info, click here to view the original listing: Hawk HPS Mazdaspeed3 Rear Brake pads -------------------------------------- SOLD --------------------------------------

SOLD! This is the flywheel from the JDM Mazdaspeed Familia, purchased from Corksport. The consensus is that Mazda shaved 2.5kg from the stock flywheel. I weighed this at 16.4lbs, so if anyone has a stock one out of the car, they can confirm the difference. Anyway, I bought this years ago thinking I would install it whenever my stock clutch gave out and it never did. It will allow the engine to rev faster without going to the extreme of an aluminum one such as the Fidanza. This is also much cheaper. I am asking $150 including shipping to the lower 48. $165 to Canada. Please PM me any questions.

Mazdaspeed CAI + Trans Mount PRICES LOWERED....... Mazdaspeed CAI with Air Straightener (No splash shield) = $75.00 Stock Trans Mount with Corksport Inserts (only 15k on mount No cracks) = $20.00 All item are OBO and I have additional pics if needed. Looking for LOCAL PICK-UP for now, and will make package deals. . Thanks for looking......... List Date: 1/29/2014 Location: Huntington Beach, CA, United States For more info, click here to view the original listing: Mazdaspeed CAI + Trans Mount -------------------------------------- This item is no longer available. -------------------------------------- Mobile friendly version: Mazdaspeed CAI + Trans Mount Go Mobile: Download the free Panjo iOS app now!

Greenstuff Pads for Mazda2 One front set of greenstuff pads for a Mazda2. These have only about 3 months (maybe 5000kms) of use on them. Street use ONLY never tracked. Went to slotted rotors and did new pads at the same time. Great street compound for this car. Good initial bite and great modulation. Never faded on me even under hard braking. I still have greenstuff on my 2 now, a great pad for this car. Prefer local pickup but will ship, buyer pays actual. List Date: 7/1/2013 For more info, click here to view the original listing: Greenstuff Pads for Mazda2 -------------------------------------- On Sale For: $50 + $0 Shipping --------------------------------------

2012 Speed3 Part Out I have the following taken off my 2012 Speed3: COBB AP V2 ###SOLD### SURE TorqR3 Rear Engine Mount $100 Shipped OBO SURE Shortcut and Counter Shift ###SOLD### SURE Full3Aeros for factory turbo w/ extra filter $$320 Shipped OBO Only 10K miles on the Engine mount, less than 15K on the remainder of the parts. List Date: 1/29/2014 For more info, click here to view the original listing: 2012 Speed3 Part Out -------------------------------------- SOLD --------------------------------------

Wow. Lip only lasted a day... Sold. How's $300obo buyer pays shipping! Please pm zip with offer! I also have some random stuff... Front top plastic piece, bottom air damper thing, bottom grill, and tops grills. Reasonable offer it all goes, just make it worthwhile for me to run to fedex! $50obo! Thanks for looking!

DIN Pocket This is plug & play for a 99 or 00 sedan where the dash was made to take two single-DIN units. Later sedans or P5's with double-DIN openings would require the “support bar” and screws which this does NOT include, but you might be able to fashion your own. This thread has info: http://www.mazdas247.com/forum/showthread.php?123814858-Single-DIN-pocket-options Source: 99 or 00 Protege sedan (1 available) $25 shipped Send me a PM for PayPal instructions and I'll ship it out ASAP. >

Fiberglass box for p5 - 150 Well I have coolant leaking into cylinders 3 and 4 so it's time to start turning it into money. I have my fiberglass box I made last summer with an alpine baseline sub for sale. Box is ported and I think came out to around 1.5-2 cubic feet, I don't remember but it's probably in the write up I made while building it. The sub in there sounded great and had excellent range. I listen to pretty much everything and was never disappointed with performance and I honestly bought it because I liked the retro design. Here's pics, I'm asking 150 plus shipping, feel free to make offer bc these don't really have a price tag on them and feel free to ask me questions. Best means of contact are email...