Mazdas247 Marketplace

Buy, sell & trade Mazdas and Mazda Parts. Proper signage photos required. Covers vehicles, parts, wheels and freebies

Sponsors

Check out our current Mazdas247 Sponsors as well as Sponsor Rules and Information
Threads
3
Posts
3
Threads
3
Posts
3

WTB/Trade/Completed

Find specific Mazda parts. Post Want to Buy (WTB) requests and Want to Trade (WTT) proposals here
Threads
31.2K
Posts
247.1K
Threads
31.2K
Posts
247.1K
hks exhaust, cpe cai, stock parts, unicorns
Here's my for sale post, buy my s***. I reside in Old Bridge, NJ and will ship out. I also make trips to the Harrisburg, PA area frequently so I would much rather meet up than ship. Check prices for shipping and s***. all prices are OBO and i dont know what a lot of this is worth, so make me offers HKS Catback Exhaust: SOLD. This thing is huge i do not want to ship it, so would much rather do local. buyer pays shipping if you want it. (2) Two, thats right, two CPE xcel cai. one was from my car, one i picked up later on. both have filters, one has water shield. both have coupler that comes with it. sold Stock Intercooler $100 + Shipping Stock BPV $40 shipped Hood ducting SOLD TMIC Cover SOLD Stock intake $40 +...
Going back to stock sale!!!
I've decided I just don't use the car enough anymore and it's in the way more than it is useful. I've got a buyer for the car locally but he can't afford it with all the upgrades. Most of the stuff in my signature will be coming off the car. I'll edit as I pull more off. Feel free to make REASONABLE offers, money talks. Thank you. First up is the stuff for sale: -2001 626 intake manifold w/ new throttle body gasket. I ended up never using it. $130 Shipped -One keyed lug nut with key. You make a $5 donation to the forum and I'll mail it to you. -Braille 15lb "no weight" battery. Just purchased last year, still has one full year warranty. Comes with aluminum mounting bracket specific to the battery. $200 shipped -HID H4 6000k headlight...
Whole Built Motor Partout / Forged Internals / Shortblock / RX8 Rims / ESC! 70 parts!
PRICE DROP NEED THIS STUFF SOLD! --> 7/17/12 ------------------------------------ PRICE DROP AGAIN! ---> 7/11/12 ----------------------------- 7/7/12 -----> LOWERED PRICES AGAIN!! --------------------------- 6/30/12 ---> SHIPPED ITEMS also here is my thread on my CP PISTONS & PAUTER RODS http://**************************/forum/f498/pauter-rods-cp-pistons-72793/ -------------------------- 6/29/12 ---> LOWERED PRICES ------------------------------------------- 6/27/12 ADDED CDHPFP LINE WATER PUMP NEW ROD BEARINGS NEW THRUST WASHER NEW FLYWHEEL BOLT SET NEW MAIN BEARINGS POWER STEERING PULLEY / PUMP ---------------------------- 48 STATES ONLY / PAYPAL ONLY PM ME FOR MY PAYPAL MY LOCATION IS 54601 *IF MY PRICES ARE TO...
P5 left over parts
Have a few parts left over from my previous FS post my part out. Been away for a bit due to a family situation. Check my eBay feedback (Tweedledee543) and the previous posting to be sure that I won't take your $$ and run. Prices do not include shipping; that is your additional cost and I will charge you my actual cost, no mark up. Items are shipping from Eastern Canada and the postal code is B2N 3L3 so check your options online before making a request. All items will be shipped insured to protect both of us. passenger's rear ABS sensor $40 OEM taillights with bulbs & pigtails $50 MAF assembly sold P5 2002 cup holders sold Mazda6 rear wiper sold 2002 P5 ECU sold (OEM, 5spd) driver's door electric mirror sold centre trim...
Whats left of the MP3 (turbo/aftermarket parts)
MSP Callaway Turbo Manifold (cracked)- $30 New FS/FP Oil Pan w/ 1/2NPT drain fitting(needs to be welded)- $50 HardRace Front and rear Motor mounts- $100 New ATP 4 ply black silicone 2.5-2.75” MAF adapter couplers - $30 New ATP 4 ply black 2-2.5” 90 degree silicone coupler - $30 New OBX-R black silicone upper/lower rad hoses- $40 H&R Triple C camber bolts (+/- 3 degrees)- $50 FS-De Crank sensor- $40 Onderground hood spoiler in Lazer blue mica- $15 FS-DE head with lifters, cams and cam gears- $offer Garrett SR20 T25 .80A/R Turbo (fresh rebuild) included ATP MSP wastegate w/ MSP wastegate bracket and silicone vacuum hose, ATP CNC compressor inlet/outlet adapters with grade 8 allen bolts, copper locking nuts- $sold MSP...
MS6 & M6i - MISC OEM/AM PARTS
MAZDASPEED6 & MAZDA 6i - MISC STOCK/AFTERMARKET PARTS FOR SALE Parts from 2006 Mazda 6i - 70,000 Kms Stock OEM Springs - good condition - 60 shipped Stock OEM Throttle Body - good condition - 90 shipped Parts from 2007 Mazdaspeed6 - 70,000 Kms Stock OEM Springs - good condition - 75 shipped Stock OEM Intercooler + Shroud - good condition, there are some bends in the fins - intercooler only - 80 shipped, shrouds - 30 shipped AFTERMARKET AEM DRYFLOW INTAKE - bought used, never installed in VERY GOOD Condition - 30 shipped MS3 COBB SRI INTAKE bracket - came with the SRI - never used - SOLD SLS Test Pipe - MS6 - bought used, never installed going another way - 50 shipped / SALE PENDING CPE TOW PLATE FOR MS6 - bought used, never...
FSDE from '95 Ford Probe - $200. Has great compression (180 across the board) and the car ran and drove great before the engine was pulled. This is a distributor motor but I was planning to run coil on plug with the megasquirt so that didn't matter to me. G Series 5 spd. trans from '98 626 - $150 Brand new 1/2 width aluminum honda radiator and 12"x12"x3" sidemount - $150 Brand new Eibach Pro-kit Springs out of the box, never installed. part number 5540.140 which can be seen here- $150 MSP radiator with 2 or 3 stock sidemounts and several fans (I just took a careful look at the radiator and it has a small split that would need attention) - $50 - pending 2 single runner intake manifolds - $100 each 2 dual runner intake manifolds - $50...
Jeff's Garage Sale
Items for Sale: 5. Steering Wheel Mounted Gauge Pod Got this in 2003 and have never had an issue with it since day one. Works great, just put some industrial velcro underneither and you are good to go (I will include this with sale) Here is a video of what it looks like with an autometer gauge: http://www.1337msp.com/salepics/gauge.wmv $55 + Shipping if applicable [COLOR="red"] 13. MSP J Pipe Cast and can be used to replace broken J pipe from all 2.0 protege/proteg5 i believe $25 + Shipping if applicable 14. MSP "MazdaSpeed" Heatshield ( someone (maybe it was me, maybe it wasnt) used a big grit sandpaper to buff it.. and never finished the job. A good hour of polishing and it would look great. $40 + Shipping...
used k04 and unused OEM CDFP.  2008 MS3
K04 = $300 + $12 shipping HP CDFP = $200 + $5 shipping Haven't been on Mazda forums in a long time. Kind of lost interest in the Mazda and eventually traded it in on a truck to haul my motorcycle to the track. I pulled the K04 because I installed a BNR stage 3. It was pulled at 35k miles. I had no problems with the k04, no smoke and it held boost very well. I had a Cobb AP stage 2 tune on it for 10k miles and never had an issue with the turbo. I don't know exactly what shaft play is, as with my new BNR you could wiggle the assembly a little bit, just like I can with this k04. It is my understanding that is normal with journal bearing turbos, as the assembly is pressurized by oil flow. Please correct me if I'm wrong. I got...
2009 Mazda MazdaSpeed3 Must See
2009 MazdaSpeed3 Sport 50k miles CLEAN TITLE 2.3l Turbo 6 Speed 263hp 280 ft-lbs torque Bose Sound System 6 disc CD Changer MP3 Hookup Leather and Suede interior Cosmetic Mods: Falken rt-11c 18x8 w/ Yokohama S.drives 225/45/18 90% Blue Gorilla Lug Nuts Blacked out Side Markers Blacked Out Rear Deflectors Blacked Gas Cap ** Car will come with 3 sets of wheels, Stock wheels, the wheels and tires on the car (summer) and winter wheels and tires 90% Engine Mods: COBB sri --ready to install COBB Intlet --ready to install This car gets tons of looks on the road and at shows, it is very clean, very well taken care of. Never seen the track, I baby this car when I drive it. Always changed with full synthetic, always use top grade gasoline...
WTS Takeda Short Ram Intake (Less than 10k Miles)
Just recently switched to an AEM intake so won't be needing this any more. Has less than 10k miles on it, filter is the original one included. Everything is great condition, no problems or missing hardware. Pics below Product Page: http://afepower.com/shop/details_new.php?partno=TR-4101P&filter&menu=gas&engine=2.3L&searchtype=vehicle&make=Mazda&model=3&year=2008&engine=2.3L&&brandID=78 Asking $140.00 + Shipping
Carbon fiber Stock exhaust manifold shield..
this was on of my first carbon fiber wrapped projects i did this about a year ago i took the stock exhaust shield and wrapped it in carbon fiber (real s*** not 3m stuff.) anyhow i used it for a few days then i started tearing down for my new turbo build and no longer need a stock exhaust shield so was GI to see if anyone wanted it something diffrent under the hood and noone else makes one im pretty sure so one of a kind i guess. anyhow make a offer on to the pics!
626 Intake Manifold, CF Engine Cover, Coolant Reservoirs,  Oil Catch Can, DG Grill...
More parts for sale!. I will continue to make threads as I uninstall parts. Prices do not include shipping. Located in 33325 626 Intake Manifold with added vac ports - 150 Greddy Oil Catch Can - SOLD Greddy Coolant Reservoir - SOLD HKS Oil Cap - 50 Ebay Oil Cap - 10 DG CF Engine Cover - SOLD Samco Hose - 30 Dual Gauge Bezel - SOLD Universal Triple gauge pod - 30 DG Grill with the top plate - SOLD Weapon R Coolant - 50 Thanks for looking. PM me or post here is you have any questions
Back