Mazdas247 Marketplace

I have had the car a little over a year, and I am ready to move on to other things. I got the car and had big plans with it, to keep it and making it long term, but time passes and things change. It is a very good daily driver, which it has been for me the last year, and has had no issues what so ever. Its original everything besides the obvious changes, around 130-132k mileage on the car, with documentation that goes back to 88 for the car from the original owner of repairs made. The car was bought in GA, and the original owner decided to scrap the car, but one of the workers decided to keep the car, and replaced the engine with one they already had at the shop. And he drove the car as a daily to work and back, well I purchased the...

SOLD SOLD CLOSE THREAD SOMEONE needs this Cargo Tray in perfect condition. $55.00 includes shipping.

(IL) GReddy Type-S BOV w/2.5" Adapter Pipe, MSP Shift Knob The BOV came off of my turbo MX-6, it has some bumps and scratches from hitting the hood, other than that it works and sounds great. MSP shift knob was used for about 2000 miles in my FD since I bought it used on this board, it has some light scratches but overall it's in very good shape, got an RX-8 knob for the FD so I no longer need this. BOV - SOLD MSP Knob - SOLD

OFFERING FOR SALE.. Everything is complete on my car, no issues, no fuel cut.The rear bumper has a scrape on one side that has been touched up with OEM paint, there are a couple small dings but nothing major. Mechanically it runs great, idles nicely, a/f ratios are always great, and when you ask for boost, it gives it to you!! NEW A/C BLOWER MOTOR RESISTOR INSTALLED on July 17th, and A/C Professionally Recharged on the 13th. I have a folder containing the invoices for the maintenance/repairs that have been completed for this car. It has a new water pump and thermostat also. It was last at Japanese Motor Works in Athens, GA, where they fixed the remaining issues, and they were awesome! This car needs absolutely nothing mechanically...

So i sold my P5 and now going back to my hybrid ways. The following are parts that were compatible with a Protege 5. Price does not include shipping, but will be shipped via USPS priority mail to support the govt :) If you buy more, I can throw you a little deal and save on shipping :) Thanks Wilson -------------------------------------------------------------------- Mazda MP5 van cubby holder This is cubby that I bought to install my aftermarket stereo (also available). Note there is a drilled out hole on the left side of it to stick my scangauge cable through so no one would see it. Price: $25 USD ----------------------------------------------------------------------------------------------- Mazda Miata NB air bag...

Spare unit off of my 07 MS3, had 46k miles on it and worked perfectly upon removal. Put on a ported one, and never did anything with this. Need to sell it before I move!

Haven't been on here in a while and I've had these parts laying around just taking up garage space and I'm looking for new R-comp funds. Sorry for the crappy cell phone pics. My good camera is currently MIA and I am looking for it as you read this. MS3 Rear Sway Bar 85$ Shipped. Obo. (Swaybar and bushings were on the car for 40k miles. Always garaged the car until last fall so rust is just starting to show.) MS3 Cat Back exhaust 180 (Updated price due to high shipping cost associated with the large box) Shipped. Obo. (Catback was on the car for 18k miles. Always garaged when the cat back was on. Zero rust.) Here are the updated hi-res pics:

As listed in the title I'm selling a practically brand new set of Tein coilover spanner wrenches they were used long enough to see if I could use them haha looking for $25 shipped

Passenger side tail light for BJ Protege Sedan. Perfect condition. $35 shipped 2.5" OD Aluminum Hardpipes grab bag. Many are already flanged. SOLD MTX 6.5" component speakers with separate tweeters and crossovers. The second pair of 6.5" drivers and crossovers are for midbass. MTX TXC6.1 Specs Includes one pair MDF adaptors for the front doors in the protege $145 shipped I'll cut you a deal on combined shipping. Thanks!

I am looking to sell many of the parts that I have either never installed or recently removed from my Protege5. All prices that say shipped are within the 48 Continental United States. I prefer to ship within this area but may make exception if item and situation allow. PM for shipping outside this area. Dibs are accepted. Make your dibs public in this thread and send me questions through PM if you wish. However, you must pay for the item within 48 hours or it will go to next person with the money. I will only accept PayPal. See list below: HiBoost Turbo Kit SOLD I have been running this kit since about the Spring of 2007. It has been rock-solid reliable for me. I have only run it on waste gate spring boost pressure (7psi) and have...

Integral Stage 2 intake, stage 1 exhaust cams. Brand New SRmotorsports cam gears 500 Shipped for everything you see in the box. I had these up for sale a while ago and had no takers. These are N/A cams, but the cam gears will take care of that for you turbo guys. I have a red 2013 Scion FRS coming from Montreal, and I need down payment money! I *may* have everything in my sig for sale soon fyi... I may keep the car as a little toy... I have not decided yet.

Hello all, I have an ecu, that I was told was an MP3 ecu, took it to the dealer, and they ran the serial on it. Came back as a manual protege 5 ecu, the guy I got it from said he got it for his MSP build. So I have no idea if it was reflashed or not... So, I just bought an MP3 ecu, and I am looking to sell this one. Looking for $50.00, shipped in the U.S. Thanks, Chris K.

Two complete with screws-$25 each One with both mounting screws, missing one decoy screw-$20 One with one mounting screw, missing one decoy screw-$15 I have 7 mounting screws in total (not pictured)

P5 OEM parts CHEAP! Price drops! Complete air conditioning for P5 - $40 Catalytic convert / J-pipe - SOLD Automatic Axles 160 000 - SOLD Automatic trip tronic transmission w/torque converter 160 000 km - $75 4 OEM Wheels in great condition, no curb rash etc VERY good condition. 2 of the wheels have usable rubber the other 2 do not - SOLD 3 misc switches - $5 AC overflow - $5 Mazda badge - $5 Motor fuse panel - $25 Inside Fuse panel - $10 Gage cluster bezel - SOLD Lower grill (broken in a few spots) - SOLD Coolant overflow - SOLD 3 pulleys - $10 3 motor mounts - SOLD Passenger side window switch (small scratch) - $5 Hatch covers - SOLD Blower - $10 AC core - $10 MAF sensor - SOLD Hose - Free with any...

*17" Black Rims with Chrome Lip *3 perfectly good tires barely used *One tire's chrome lip is dented *Tires have great tread on them still *Less than a thousand miles on them and the tires too

Cpe rmm & brand new oem ms3 mats (SOLD) CPE RMM & BRAND NEW OEM MS3 MATS CP-E 75duro RMM. Works as advertised. $60 Shipped! SOLD Brand NEW OEM Mazdaspeed3 mats. Used just to get home from the dealer. $55 Shipped! SOLD

OEM Recirculation tube for MS3 30 shipped, 15k miles My feedback score: http://forum.***************/itrader.php?u=78785 **PM IF INTERESTED**

Part out 5 Speed Manual transmission conversion / swap in NY **I'll be at the Orange County Choppers Mazda meet this weekend if anyone that's going is interested in any of these parts** 130k on all components. The shifter and trans were nice and tight before they were removed. All parts in good condition. Located in NY 12589. Trans: $450 Shift linkage: $125 Pedals: $50 Flywheel: $40 01 2.0 ES ecu: $50 offers on everything else 845-242-5173

Sold!

$250 shipped. Never used - minty fresh! CD, maual, install instructions & ECU pinout diagram included.