New Seats - Cobra Imola Pro

[DanR]

I had these sitting around from my MX5 so I bought some seat mounts for the 2 and installed them. Sorry for the crappy phone pics. The driver side is on a slider and has good clearance. The passenger seat is fixed mount and touches the pillar, but otherwise fits with no other issues. The airbags light is on. Based on my experience with the MX5, you can add a resistor for the driver side, but the passenger side is much more difficult so I didn't bother it. Let me know if you have any questions.

 

[jasyatz]

They look great! I'm a huge fan of these seats, but they sit a little tall for me with the slider. Do you have height issues with them? Rich got his really low, but had to ditch the sliders. makes fitting in the car in late fall ( with a jacket on) a bit tight.

 

[DanR]

I am 6'2" and they were actually too low for me before I added the sliders. The side mounts were modified to work in the MX5. I had them bolted to the floor in the MX5 with no sliders trying to hit under the RHT with a helmet. Whereas in the 2, I have several inches between the roof and my helmet.