Recent content by jezterr

a few oldies...

they need to repave the parking lot. but i like how the curbing looks like teeth.

i started to hear a similar vibration a couple weeks ago. i took a look and saw that the damper was loose, but not apart. i took it off, checked the bushings and saw that the washer on the shaft had imbedded itself into the bushings, allowing for some play, which i assumed resulted in the...

ever since mine came apart, and i flipped it around the first time, it hasn't come apart and is immovable. if it moves around, it's not serving its purpose. there is a washer on the shaft that goes between the two bushings which hold it in place. no sliding should occur.

thanks! you mean brand? or type? either way, i followed this guide and got them from www.superbrightleds.com.

some shots i've gotten over the last year...

nice job on the shots and post process. taken at speed (engine running, etc)?

sorry, skimmed through the thread but didn't find a direct answer... would it be safer to go with a too stiff spring than a too soft spring? i don't have a boost gauge of any kind right now, so i can't measure it in anyway. i just want to make sure i'm not damaging anything with having this bpv in.

cliff notes: 1) remove plastic engine cover. 2) remove intercooler. 3) replace sparkplugs. 4) reinstall in reverse order.

to that mustang and anyone else that can't stay in their lane, here's a big fat middle finger for you. learn to drive.

so i opened my hood to find this torque damper pulled apart. from what i could tell, the internals were vibrated apart and the shaft holding the bushings got unscrewed. so i put it back together with some lock-tite. hopefully it won't happen again.

i'm not able to on mine.

wow. that's a lot of work to get rid of the side moldings. i just grabbed one end and pulled them off.

is your mirror cracked?

did you fix your engine mount?