Aftermarket LED DRL bars

[ctaguchi]

has anyone order and installed these from ebay?
http://www.ebay.com/itm/281091319394?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

 

[fletcheru]

Yes, and they are good

 

[Evan55]

are they on with the DRLs in the headlights or do they replace the DRLs in the headlights?

 

[nXt]

Yes, and they are good

Please give more information about http://www.ebay.com/itm/281091319394
Is it 'plug and play'? Any wire splicing required?
Do you have Touring model, or is your CX-5 have DRL in the highbeams? Do these turn on with the DRL?
More details please.

 

[First MZ]

Installed this DRLs led bars last week, and disconnected the stock yellowish DRLs.

 

[lighting]

for your reference

[/URL][/IMG]

 

[squeaky]

for your reference

[/URL][/IMG]

What is this?
Looks cool

 

[lighting]

[/URL][/IMG]

another looks (attn)

 

[mtvon2]

Installed this DRLs led bars last week, and disconnected the stock yellowish DRLs.

I like these DRLs the best because you can't see the individual bulbs. How did you mount them? From where did you order these? Thanks.

 

[Iceman04503]

Installed this DRLs led bars last week, and disconnected the stock yellowish DRLs.

Those are nice. Where can i get a set of those? Did you mount them with 3m double sided tape?

 

[First MZ]

I like these DRLs the best because you can't see the individual bulbs. How did you mount them? From where did you order these? Thanks.

I bought it from a local store, it is Philips Daytime Light Guide, guess you could easily get them by online ordering.
Take out the fog lamp cover, install the bracket (included) to the bumper by the self tapping screws (include). Push the light assembly into the bracket, it a 'click on' fit. Then carefully measure and make a window cutout on the fog lamp cover. Reinstall the fog lamp cover, and you good to go.

 

[First MZ]

Those are nice. Where can i get a set of those? Did you mount them with 3m double sided tape?

Hi Iceman, no, I didn't mount them with 3m double sided tape, for details check out the previous post, enjoy.

 

[mtvon2]

I bought it from a local store, it is Philips Daytime Light Guide, guess you could easily get them by online ordering.
Take out the fog lamp cover, install the bracket (included) to the bumper by the self tapping screws (include). Push the light assembly into the bracket, it a 'click on' fit. Then carefully measure and make a window cutout on the fog lamp cover. Reinstall the fog lamp cover, and you good to go.

Thanks First. These lights are not cheap. The least expensive price I could find is about $220. But they are the best looking DRL I have seen so far.

 

[Iceman04503]

http://www.theretrofitsource.com/le...drl-led-running-light-48618.html#.U3JQBHmYbcs

What do you guys think of this one?

 

[Iceman04503]

Theres always this: http://store.ijdmtoy.com/High-Power-COB-LED-Daytime-Running-Lights-p/60-079.htm
For 79.99 its not a bad price.

 

[First MZ]

Pictures shown they are both well built and having tough body, not bad. Not sure they have the dim function when the headlights/parking lights are turned on, since the description of the products didn't mention it. The oncoming cars will find the DRLs on their full brightness very distracting at night...

 

[Iceman04503]

I emailed IJDMTOY and theirs does not have a dim function.

 

[mtvon2]

Would the DRLs be on at night with your headlights on?

 

[mtvon2]

I emailed IJDMTOY and theirs does not have a dim function.

I like this one the best, but I am not sure how they would actually mount.

 

[Iceman04503]

I would hook them up to my high beams so they would only come on with the high beam drl and off when the low beams are on. They come with brackets that are fairly flush to the led housing. Are the fog lightshousings easy to take off?