Mishimoto Mazda Protege Radiators ('01-'03) now available!
- Thread starter MP3racer
- Start date
They've definitely sold a few of those...
So the Mishimito is a dual core, single pass Radiator? Just confirming. Thanks for the explanation
Yes, the Mishimoto Protege radiator is a dual core single pass design....no problem...thanks for the interest!
cougar10agREDUX
Member
- :
- 2003 Protege ES-T
crap, wish i saw this before i bought the corksport radiator. it's a gorgeous radiator, just a little thick for my setup causing some fitment issues with my intercooler piping. plus the mishimoto is cheaper and comes with a nice rad cap.
squire0311
Member
- :
- 2003 mazdaspeed protege #1215
how much for shipping to hawaii due to everything being express shipping to here. 96744 is the zip
PM me your full shipping address and I can get an exact quote...otherwise, it has run around $20....pretty amazing for the size of the box and all!
- :
- Banned For Being A Troll
I'm going to bump this because they have made a fan kit that is supposed to fit DIRECTLY to the radiator.
here is a picture of it.. I am supposed to get the fan kit in one week.. I will update with very detaild pictures..
here is a picture of it.. I am supposed to get the fan kit in one week.. I will update with very detaild pictures..
- :
- Banned For Being A Troll
I am sorry, I didn't know, I should have liked to support a vendor... I make a point of looking here before..
It was an E-Bay find..
It was an E-Bay find..
Last edited:
hornsfan10609
Certified Mazda Tech
- :
- 2003.5 Mazdaspeed Protege x2
I saw that but didn't want to drop $200 on it.
Hey..no problem.....just wondered where you found it.
Anyway, let us know how it fits!
i have the radiator and fans + shroud! everything fits well and no more overheating
Awesome!
Do you have a turbo or NA?
- :
- Banned For Being A Troll
I wanted to follow up.
The Parts are Solid and Well Priced
The Shroud will NOT fit a GT-30.... No Way....
It Might not even fit a GT-28/5
The turbo sits 7mm from the rad, the shroud is like 27mm plus the fans.
I decided to have the shroud welded to the front, I undid the 10mm nut that holds the fan on, flip them over, and reversed the polarity. The motor spins backwards, but the fan blades are correct.
The Shroud was welded by welding six 2cmx1cmx1cm blocks, Three at the Top and Three at the bottom.
I used insulation foam (Draft Stopper) to seal the 4 sides.
It Cools Like A CHAMP.
- :
- 99 protege
nice^
Yes, it will fit with the stock turbo and exhaust.
Pm me if you would like a quote on a radiator and shroud.
Thanks!
Tom
