The Ohio Random Thread... aka We Should Probably Be Working
- Thread starter THE Phen
- Start date
princess peach
Member
- :
- '92 Miata, '06 MS6
Jay Andrew got back to me, he expressed his preference of pedal feel from the SS lines and recommended to keep bleeding the old fashioned way. I'll look into those and see how much they run
for the front door, shipping might be a little pricey but you might want to try to find one from the south. Anything you find up here might be pretty rusty.
Leyland, what color Protege doors were you looking for? We saw a green one at the Pull-a-Part saturday in Cleveland. But we weren't really looking for Protege's. They usually have one or two around this area. But like Nate said, they are probably pretty rusty.
Rockin03mp5
Member
- :
- '13 Mazda3 / '13 Edge / Your Mom
Hey lewis...
I got a super rare mint blue grill painted in black mica if you want it. (Mahk's old grill)
Dont remember if you were going to Belle Isle, if they can every get that together, but i would give you a better deal if shipping was out of the equation.
I got a super rare mint blue grill painted in black mica if you want it. (Mahk's old grill)
Dont remember if you were going to Belle Isle, if they can every get that together, but i would give you a better deal if shipping was out of the equation.
Rockin03mp5
Member
- :
- '13 Mazda3 / '13 Edge / Your Mom
being that it is already painted black mica, it would be easier.
thought i would ask. need to get rid of it sometime here.
thought i would ask. need to get rid of it sometime here.
I've got a bottle of the ATE Super Blue sitting unopened in the garage. It was supposed to go in for the summer Mid-Ohio event last yearI know you're not supposed to let brake fluid sit for more than a year, but what open if it's unopened?
If it's unopened, it's not pulling moisture out of the air.
Rockin03mp5
Member
- :
- '13 Mazda3 / '13 Edge / Your Mom
I thought all 3rd gen proteges shared the same doors. (protege, protege5, and Mazdaspeed Protege) even 99-00 were the same as 01-03. im sure others can confirm.
PrinceValorum
Member
- :
- 95 626 FS, 89 Toyota Derux 4x4
^Mm, kinda jelly of those fans.
Anyone interested in a 20 ton shop press? I got it to use with a press brake, but I don't think the stage is as wide as the china freight one (which the press brake kit was designed for). The guy I bought it from said he looked at the HF units, but didn't like how the ram came down out of square, so he went with this one. Only reason he sold it was because he picked up a 50 ton unit, and said he'd used this one made 3 times. It looks about new. All I did with it was bend a piece of scrap 3/16" and giggle at how easy it did it. I'd be asking 150$.
Anyone interested in a 20 ton shop press? I got it to use with a press brake, but I don't think the stage is as wide as the china freight one (which the press brake kit was designed for). The guy I bought it from said he looked at the HF units, but didn't like how the ram came down out of square, so he went with this one. Only reason he sold it was because he picked up a 50 ton unit, and said he'd used this one made 3 times. It looks about new. All I did with it was bend a piece of scrap 3/16" and giggle at how easy it did it. I'd be asking 150$.
What a great day. Could have been a little warmer, but I'm not going to b**** about that. Detailed the s*** out of the MSP and took it for a little photoshoot where I took the bike a month ago. I didn't even think about the top of the incline and bottoming out when going up and checked on the way down. I was only about 1/2 inch or less from hitting. Could have been disastorous, but turned out sick. I'll post some pics after they are done loading.
