What have you done to your P5 today?
- Thread starter Tg5
- Start date
That is $3k installed and out the door
Probably. I got mine from my buddy who bought a Tennessee turbo'ed red P5.
bikingpro5
Member
- :
- 03 Protege5
ya it looks good on your car with the cf hood.
Last edited:
was trying to get new rims to replace the 18s it has on now that are messed up and foudn a set of black with red msr's 18s for 175 for all four almost brand new. these are 18x8 ones on right now are 18x7.5 so im wondering if the new ones will fit no problem
YELLOWMAZDAPR5
Member
- :
- 2002 MAZDA, PROTEGE 5 Turbo
^ what offset are the msr wheels? Are you lowered?
Last edited:
YELLOWMAZDAPR5
Member
- :
- 2002 MAZDA, PROTEGE 5 Turbo
What brand coilovers?
YELLOWMAZDAPR5
Member
- :
- 2002 MAZDA, PROTEGE 5 Turbo
Wow +35. Ok skinny tires, camber, rolled fenders you can pull it off. How low are you trying to go? That matters.
Last edited:
bikingpro5
Member
- :
- 03 Protege5
added a custom start up screen on my pioneer
not any lower than it is right now since im on 18s until later on i go with smaller rims. and yeah tires are skinny because of the set up they had on the car before with the other 18s.
thats how it sits. well a tab bit lower after the springs settled
CheeseHelmet
Member
Yesterday night I used it to haul a bunch of stuff, I was amazed to see that I could fit 8 foot 4x4" planks without having to rest them on the dashboard. I used child seat hook on back passenger seat to attach a tie-down strap to keep the wood from moving, it worked fantastically well 
Today I checked out the oil leak I spotted the other day and I'm starting to think I don't have a leak. The reason being is that there's oil all around the pan and on the starter, the A/C compressor, and the back of the block (around the oil pressure switch and the knock sensor). I'm guessing the oil is from when I got the car rustproofed last fall. Also, it's not leaking on the driveway ... I'd have oil on my driveway if I had a slow leak, right? TELL ME I'M NOT CRAZY
Today I checked out the oil leak I spotted the other day and I'm starting to think I don't have a leak. The reason being is that there's oil all around the pan and on the starter, the A/C compressor, and the back of the block (around the oil pressure switch and the knock sensor). I'm guessing the oil is from when I got the car rustproofed last fall. Also, it's not leaking on the driveway ... I'd have oil on my driveway if I had a slow leak, right? TELL ME I'M NOT CRAZY
ProjectBlack
Member
- :
- 2003 Mazda Protege 5
Bikingpro...super tight!
Removed the c/f hood, Tribute washer nozzles (in the stock hood) and Stebel Nauitlus horn and swapped in their OEM counterparts, also removed the c/f mirror covers, c/f eyelids, and Expel fog light protection to find my DS fog light cracked.
Nooo... don't do it!
ProjectBlack
Member
- :
- 2003 Mazda Protege 5
Removed the c/f hood, Tribute washer nozzles (in the stock hood) and Stebel Nauitlus horn and swapped in their OEM counterparts, also removed the c/f mirror covers, c/f eyelids, and Expel fog light protection to find my DS fog light cracked.
Are you selling the cf parts?
BlackCherry
Member
- :
- 2002 Mazda Protege 5
CheeseHelmet
Member
What the hell are you doing man?
Extreme weight reduction?
Extreme weight reduction?
