What have you done to your MSP today?

[RogerdodgerMSP]

its called the fs-de and i wouldn't consider this common but kl swaps have been happening more and more lately

thanks man always wondered hah, and do u know the specs on the kl engine?

 

[2.0t03speed]

depends what one theres the kl-de and the jdm ze

 

[RogerdodgerMSP]

oh i see do u know what cars came stock with the kl-de?

 

[Wagonbacker9]

thanks man always wondered hah, and do u know the specs on the kl engine?

oh i see do u know what cars came stock with the kl-de?

SEARCH...

and yee shal find.

 

[RogerdodgerMSP]

gotcha, i see the mx-6 did, nice learned something new! hah

 

[hornsfan10609]

I was at work today and I saw another titanium MSP, there is a black mica across the street at Wells Fargo I see everyday but this is the first time i've seen this car. It had a different mazdaspeed emblem on the back and it was clean despite the crappy weather today.
Car also threw a CEL, going to borrow my buddy's code reader, I bet it's spark/misfire related and it's the cause for the worsening hesitation.

 

[Ricktalife]

hey does anyone know what the MSP engine is called? such as hondas have B16 D16 K20 etc im curious i havent heard anyone talk about it, and is there a common engine swap for the MSP i would like to know thanks!

SEARCH...

and yee shal find.

Yea... this is probably the most frequently asked question in the MSP section.

 

[719prottege]

its a k20

 

[blazinrola80]

Got around to making the turbo manifold for the msp..

 

[Valk]

trying to figure out the best way to do fmic piping. only using 2.25" wonder if i can stuff it under the headlights or somthing ha.

 

[destineal]

You plan on cutting the car any? I'm doing 2.5" piping. Just gotta decide on Routing.

 

[mildsalsa]

got some new tools so i can start tearing down the head soon.

 

[o0n8]

trying to figure out the best way to do fmic piping. only using 2.25" wonder if i can stuff it under the headlights or somthing ha.

You plan on cutting the car any? I'm doing 2.5" piping. Just gotta decide on Routing.

there's a couple different ways in wagon's how-to http://www.mazdas247.com/forum/showthread.php?123759220-How-To-Ebay-FMIC, I can't decide on routing either. I think it will be easier once I go to instal so i can see what I can and can't do instead of trying to mentally picture everything

 

[SCMP3]

well i dont have internet at my new place yet, which stinks, but what can you do.

this week my car has been under 6 inches of snow, then 1 inch of an ice coating. then stuck in the mud for three days until my friend came over in his 4x4 yukon and pulled me out :[ no fun. no fun at all

 

[Signature Sound]

have you guys checked www.frozenboost.com? and www.siliconeintakes.com? great sites for couplers, v-band clamps... etc

 

[SCMP3]

i have a froenboost slim fan from a local member. i love it

 

[HKPRO5]

Yea I got my V band clamps for my exhaust from them. They ship fast too.

 

[Lunatik]

thanks to Alejo_MSP ... i got my tokico illuminas with goldline springs on yesterday and today i got my new Nittos mounted and balanced

 

[Valk]

i actually found a hole under the drive side headlight i am able to stuff a pipe through for the cold pipe. if it works out ill still be able to have my sri in the same location.

coldside looks like its going to be a lot easier than the hotside. not seeing how i can do it without removing the washer bottle, or coming out under the car to scrape everywhere.

 

[Wagonbacker9]

i actually found a hole under the drive side headlight i am able to stuff a pipe through for the cold pipe. if it works out ill still be able to have my sri in the same location.

coldside looks like its going to be a lot easier than the hotside. not seeing how i can do it without removing the washer bottle, or coming out under the car to scrape everywhere.

I ran it under, lowered on spools, and I've banged it a couple times. IMO the best option on the hot side is to cut through the core support.