Aggressive fitment anyone?!

[TWISFM]

the lowness helps out the flushness trust me


oh and nk2a..am i not allowed to rock flush as ****...well..ima do it anyway

 

[Wagonbacker9]

ricer. lol

 

[TWISFM]

white hood goes on tomorrow

 

[nk2a]

oh and nk2a..am i not allowed to rock flush as ****...well..ima do it anyway

hells yeah man. rock away that's why I sent em. was just playn

 

[Sliver5]

Moar offset!!

 

[ucMP3]

f: 17x8 +45, 225/45/17
r: 17x8 +42, 215/45/17

Tokico Illuminas set @ 5 & RS*R Race Springs

 

[Circuit]

Sweet! I would have put the lower offset ones in the front, but its only 3mm

 

[ucMP3]

Sweet! I would have put the lower offset ones in the front, but its only 3mm

Ya, they are both 17x8 +45, but the rears didn't seat properly with the hub/rotor. So, I used 3mm spacers to close the gap and then they fit perfectly. So it's just the overall/effective offset that's slightly different in the back.

I still have those 15mm spacers that I used with my Racingharts. I am probably going to play with those down the road, once I can get a solid fender roll/pull. Depending on where they sit @ +30, I am going to look into getting some 5mm-10mm spacers to use all around, most likely. I have a mild fender roll currently, and get some decent rubs in the rear with only me in the car. My backseat is non-functional at the moment, lol. It looks like I'm going to have access to an Eastwood fender roller this weekend, hopefully... My fingers are crossed.

 

[KauaiMP5]

@ucmp3

yeah, i poke out a little more...lol

 

[Protege03ak46]

you need a slight pull/flare and you'll be golden.

 

[KauaiMP5]

you need a slight pull/flare and you'll be golden.

to pull fenders, do u literally just pull it? it might sound like a dumb question but it just seems to easy to try

 

[Wagonbacker9]

to pull fenders, do u literally just pull it? it might sound like a dumb question but it just seems to easy to try

you use a fender roller, and you just don't stop when the fender lip is flattened.

there are other methods, but they're less.... reputable.

 

[xDJ DUBx]

Its like making a flare out of the existing body instead of adding on something and if you're gonna do it, use a roller and someone who knows what they're doing. Any other way is gonna end in disaster.

 

[Protege03ak46]

I used a pipe in my first flare on my old wheel. Turned pretty good actually.

 

[ShelbyGoat]

@ucmp3

yeah, i poke out a little more...lol

you know your tire is sliced right?

 

[Wagonbacker9]

you know your tire is sliced right?

don't worry about it.. its hellaflush, so its cool.

 

[ShelbyGoat]

don't worry about it.. its hellaflush, so its cool.

gotcha...sacrifices to be hellflusher

 

[funkalicious21]

I like hellaflush

 

[323]

poor tire

 

[TWISFM]

thats some serious damage no?