Please help i dont know why nothing is plugged to this!

[Protegekid504]

I have a 2000 mp3 es and i found this connector between the ps bottle and washer fluid bottle anyone know what its for????

 

[808MP5]

lol
i've seen this question before... sorry can't help you

 

[Protegekid504]

lol
i've seen this question before... sorry can't help you

DAMN! lol alright thanks anyways

 

[wiley858]

Looks like the headlight fluid sensor.

 

[MSP-2003.5]

Looks like the headlight fluid sensor.

that's funny as heck

 

[808MP5]

hehe found the thread... i think it's the same plug
http://www.mazdas247.com/forum/showthread.php?t=123761350

 

[Protegekid504]

hehe found the thread... i think it's the same plug
http://www.mazdas247.com/forum/showthread.php?t=123761350

AHHH my savior lol . Thankyou! It was just bugging the heck out of me and as a mechanic i couldnt have something in my car that i dint know about lol (yippy). thanks again!

 

[DarkAngel]

What baffles me more is if there ever were MP3's in the year 2000 and an ES to boot.

 

[Focus]

It's there to check the viscosity of the windshield washer fluid bearings oil.

 

[isbre]

I think it's for the Headlight washer motor.

 

[Protegekid504]

The explination i got was this.......

Ok so I think I have figured it out. The rear harness (injector, coil, VTCS, etc) on our cars currently have the A/c and PS pressure sensor connectors in that one.

BUT there must be another rear harness that does not have that those connectors or they just updated the rear harness and that connector is another location for those wires to go to. Maybe it was the original place, but because of a problem they had to redo the rear harness to include these. OR the front harness is off of another model..... Most likely at the ecu those are not connected and the ones that are in the current rear harness are.....

Looking at the diagrams this there is 2 locations for the PS pressure switch, one on the rear(B2-26) and one on the front (X-02)
They don't even list a connection for the compessor clutch but thats the other wire.....

 

[mazdaspeedp]

thats the fan control module connector

 

[Protegekid504]

thats the fan control module connector

What do you mean the fan control module? both my fans work im pretty sure....

 

[destineal]

Test it and see if its hot

 

[Protegekid504]

Found out what it was my bad didnt post. Just from a revised wiring harness

 

[littlemimus]

lol everyone trips over this!

 

[Protegekid504]

Lol yeah i noticed, just didnt know if i was missing something (lol2)