GI isport sedan roof spoilers...

Just wanted to see how much interest there would be in a roof spoiler in either Carbon fiber or fiberglass from isport for the sedan. Would be something like this

Update...
isport has agreed to make this happen if we can get six people to put down 50$ deposits. The deposit of 50$ goes toward the purchase and locks you in at the GB price. It will be 300$ for carbon fiber and 250$ for fiber glass. They also offered free shipping to the first six! You can also make payments on the roof spoiler until it is paid off for those of you who can't afford the full amount at the moment. Paypal is Rwkam@hotmail.com Here is the plug of what it will look like...

UPDATE! 5-13-10
We got all six in and just in time! If anyone else is interested in these better jump in with the deposits now to be able to get the GB price cause isport said price is likely going up after this.

Interest list
1. Msp03.5 (pending price and design)-Deposit sent
2. MS_Rick (pending price and design) DEPOSIT IN
3. civickilla03 ( pending design) in carbon fibre please-DEPOSIT IN
4. _MSprotegy (pending price and design) deposit in
5. SwirlFx- Deposit in
6. pepdamazdas (DEPOSIT IN!)
7. paniaguae640 (pending price and design) deposit sent
8. Pastime-Gamer(PP&D)
9. XxaltezzaxX (pending price and design)
10. 2k3prorida (pending design)

Deposits sent...
1. Msp03.5 (pending price and design)-Deposit sent
2. MS_Rick (pending price and design) DEPOSIT IN
3. civickilla03 ( pending design) in carbon fibre please-DEPOSIT IN
4. _MSprotegy (pending price and design) deposit in
5. SwirlFx- Deposit in
6.pepdamazdas (DEPOSIT IN!)
7.paniaguae640 (pending price and design) deposit sent

 

[Ash-Lyn]

We need to know the price range from isport - then people can make there decision..

OK... to produce one very similar to the one shown in the pic it would be $300.00 in Carbon and $250.00 in fiberglass (gelcoated and ready for paint). Keep in mind that we have to create the plug of this to make the mold and that is a very time consuming process. As stated above, we will need six deposits before we even start this process. Thanks, Bob & Bryan

 

[civickilla03]

If you can make one like this I will send deposit now...

hey i am down to make the deposit if it will end up looking like this, or anything close, the carfield was to round for me.

i just dont want to put down some money if it ends up looking like something i dont want.

otherwise i can send the deposit w/e

 

[MS_Rick]

OK... to produce one very similar to the one shown in the pic it would be $300.00 in Carbon and $250.00 in fiberglass (gelcoated and ready for paint). Keep in mind that we have to create the plug of this to make the mold and that is a very time consuming process. As stated above, we will need six deposits before we even start this process. Thanks, Bob & Bryan

I am in - Who do we send the funds to?

 

[civickilla03]

1. Msp03.5 (pending price and design)
2. paniaguae640 (pending price and design)
3. njaremka (pending price and design)
4. pepdamazdas (pending price and design)
5. blackmica_es ( ^^^ )
6. Pastime-Gamer(^^^)
7. XxaltezzaxX (pending price and design)
8. MS_Rick (pending price and design)
9. _MSprotegy (pending price and design)
10. civickilla03 ( pending design) in carbon fibre please

 

[repthemazdas]

OK... to produce one very similar to the one shown in the pic it would be $300.00 in Carbon and $250.00 in fiberglass (gelcoated and ready for paint). Keep in mind that we have to create the plug of this to make the mold and that is a very time consuming process. As stated above, we will need six deposits before we even start this process. Thanks, Bob & Bryan

how long u think ill take to make in carbon fiber?

 

[Ash-Lyn]

It looks like we have a pretty good interest. We will do this if we get the six deposits to make the mold. Of course the deposit applies to the purchase price. We will design it to resemble the one in the picture, but since we do not have one of these we will be guessing as to the size and radius. If anyone has access to this you can send me the measurements. If not I will interpolate and come as close as I can. You can send deposits to Paypal account @ Rwkam@hotmail.com. Please indicate in the notes section whether you want it in CF or Fiberglass and also note your forum screen name. This will make it easier for us to keep track.... Thanks Bob, Bryan and MeSha

 

[repthemazdas]

It looks like we have a pretty good interest. We will do this if we get the six deposits to make the mold. Of course the deposit applies to the purchase price. We will design it to resemble the one in the picture, but since we do not have one of these we will be guessing as to the size and radius. If anyone has access to this you can send me the measurements. If not I will interpolate and come as close as I can. You can send deposits to Paypal account @ Rwkam@hotmail.com. Please indicate in the notes section whether you want it in CF or Fiberglass and also note your forum screen name. This will make it easier for us to keep track.... Thanks Bob, Bryan and MeSha

ill send deposit on 13th ok

 

[repthemazdas]

It looks like we have a pretty good interest. We will do this if we get the six deposits to make the mold. Of course the deposit applies to the purchase price. We will design it to resemble the one in the picture, but since we do not have one of these we will be guessing as to the size and radius. If anyone has access to this you can send me the measurements. If not I will interpolate and come as close as I can. You can send deposits to Paypal account @ Rwkam@hotmail.com. Please indicate in the notes section whether you want it in CF or Fiberglass and also note your forum screen name. This will make it easier for us to keep track.... Thanks Bob, Bryan and MeSha

but do u know how long ill take to make the cf mold?

 

[Ash-Lyn]

but do u know how long ill take to make the cf mold?

If we have a part to mold from, it only takes a day. If we have to create a plug (something to mold from) that process alone can take a few days. The roof spoiler extension for the P5 that I just finished had over 40 man hours in it. This one will not be as hard, but it still takes time and a little trial and error to get it right. Once the mold is made, we can make one a day (maybe two if I want to work into the night).

 

[repthemazdas]

If we have a part to mold from, it only takes a day. If we have to create a plug (something to mold from) that process alone can take a few days. The roof spoiler extension for the P5 that I just finished had over 40 man hours in it. This one will not be as hard, but it still takes time and a little trial and error to get it right. Once the mold is made, we can make one a day (maybe two if I want to work into the night).

ok cool ill send deposit on 13th. 50$ right?

 

[paniaguae640]

I'll send deposit on 14th for carbon

 

[njaremka]

OK... to produce one very similar to the one shown in the pic it would be $300.00 in Carbon and $250.00 in fiberglass (gelcoated and ready for paint). Keep in mind that we have to create the plug of this to make the mold and that is a very time consuming process. As stated above, we will need six deposits before we even start this process. Thanks, Bob & Bryan

too rich for my crap car, even in fiberglass. i'm out.

 

[MS_Rick]

deposit sent!

 

[Ash-Lyn]

1. Msp03.5 (pending price and design)
2. paniaguae640 (pending price and design)
3. njaremka (pending price and design)
4. pepdamazdas (pending price and design)
5. blackmica_es ( ^^^ )
6. Pastime-Gamer(^^^)
7. XxaltezzaxX (pending price and design)
8. MS_Rick (pending price and design) DEPOSIT IN
9. _MSprotegy (pending price and design)
10. civickilla03 ( pending design) in carbon fibre please

 

[civickilla03]

1. Msp03.5 (pending price and design)
2. paniaguae640 (pending price and design)
3. njaremka (pending price and design)
4. pepdamazdas (pending price and design)
5. blackmica_es ( ^^^ )
6. Pastime-Gamer(^^^)
7. XxaltezzaxX (pending price and design)
8. MS_Rick (pending price and design) DEPOSIT IN
9. _MSprotegy (pending price and design)
10. civickilla03 ( pending design) in carbon fibre please-DEPOSIT SENT

 

[msp03.5]

1. Msp03.5 (pending price and design)-Deposit sent
2. paniaguae640 (pending price and design)
3. njaremka (pending price and design)
4. pepdamazdas (pending price and design)
5. blackmica_es ( ^^^ )
6. Pastime-Gamer(^^^)
7. XxaltezzaxX (pending price and design)
8. MS_Rick (pending price and design) DEPOSIT IN
9. _MSprotegy (pending price and design)
10. civickilla03 ( pending design) in carbon fibre please-DEPOSIT SENT

 

[2k3 PrO RiDa]

1. Msp03.5 (pending price and design)-Deposit sent
2. paniaguae640 (pending price and design)
3. njaremka (pending price and design)
4. pepdamazdas (pending price and design)
5. blackmica_es ( ^^^ )
6. Pastime-Gamer(^^^)
7. XxaltezzaxX (pending price and design)
8. MS_Rick (pending price and design) DEPOSIT IN
9. _MSprotegy (pending price and design)
10. civickilla03 ( pending design) in carbon fibre please-DEPOSIT SENT
11. 2k3prorida (pending design)

 

[paniaguae640]

Bumpshizzle

 

[njaremka]

1. Msp03.5 (pending price and design)-Deposit sent
2. paniaguae640 (pending price and design)
3.
4. pepdamazdas (pending price and design)
5. blackmica_es ( ^^^ )
6. Pastime-Gamer(^^^)
7. XxaltezzaxX (pending price and design)
8. MS_Rick (pending price and design) DEPOSIT IN
9. _MSprotegy (pending price and design)
10. civickilla03 ( pending design) in carbon fibre please-DEPOSIT SENT
11. 2k3prorida (pending design)

fixed

 

[We Are Ninja]

too rich for my crap car, even in fiberglass. i'm out.

^ This.

EDIT: It'd probably be a good idea to post this in the MSP and MP3 F/S sections as well; I know several MSP guys were looking for something like this...