The Ohio Random Thread... aka We Should Probably Be Working

[nastyspeedRN]

Any one know the inside diameter of the coolant hose so i can order the right adapter for the water temp gauge??? Thanks

 

[iSpoon]

Any one know the inside diameter of the coolant hose so i can order the right adapter for the water temp gauge??? Thanks

I think it's around 34 inches... I might need to double check though. (fight)

 

[dstmsp03]

I think it's around 34 inches... I might need to double check though. (fight)

he was meaning the diameter of the hose as in 2 inch, 2.5 inch.. ext.. not length.. (cabpatch)

 

[iSpoon]

Oh I was just throwing out a random number knowing it was wrong regardless of length or width. (silly)

 

[Lewis7789]

MS3 owners don't know jack about thier cars.

 

[iSpoon]

Here we go again.. (whistle)

 

[jri4]

MS3 owners don't know jack about thier cars.

So I've been lurking and reading all this MS3 bashing and have come to a defintive conclusion on what path I would like to go with my car. This path will allow me to fit in better with you guys and not be so awkward:

1. 20x10's on the front, 20x12's on the rear (88mm offset)
2. Exhaust Delete Mod (Yes, the entire exhaust, perhaps the exhaust manifold as well)
3. Quad Turbo GT3071r's (Yes, one for each cylinder)
4. Tuned by Piasani Flash (My boys in the ITALIA are working on somethin special)
5. Weight Reduction (I figure I can remove at least 500 pounds...seats, any plastic, etc.)
6. Battery moved to back for better weight ratio (59.99/40.01)
7. HUGE FUKIN STEREO SYSTEM WITH 4 AMPS and 18 10000w SPEAKERS (adding roughly 500 pounds of weight in equipment)
8. Two Words: NEEDZ MOAR LOW and NEG CAMBER BABY YEAH!
9. I'm having GTFO Performance mold me a bigger rear wing to increase drag...sometime my back end gets squirrely during drifting
10a. Nevermind, they are gonna do a whole widebody drift kit now
10b. 15 point racing harness
11. NEEDZ MOAR STICKERZ!!!
12. Fuzzy Dice

Once this is all done, I'll post a youtube vid of 10-155 from a roll ending in a fiery crash by driving off a cliff

\rant unless, of course, I edit or write another

But seriously though, how much is all this gonna cost me?

 

[Lewis7789]

Hahahaha! Awesome.

And come on, Jasen, you know I'm just kidding. Hug?

 

[Fiji Mazda3]

Hahahaha! Awesome.

And come on, Jasen, you know I'm just kidding. Hug?

Don't apologize for speaking the truth.

 

[magnumP5]

I wish I still lived in VA. I'd be up there on Capitol Hill with all the other true Americans...


In other news I got the front coilovers installed yesterday. Still playing with the ride heigh - right now about 25" from the ground to the fender or about 1" wheel gap. Still have another 2.5" of drop available, lol...

 

[o0n8]

i take it not a big obama fan.

I got a Silverado 4x4 extended cab for a rental, that thing is like a monster truck compared to my msp

 

[Lewis7789]

In other news I got the front coilovers installed yesterday. Still playing with the ride heigh - right now about 25" from the ground to the fender or about 1" wheel gap. Still have another 2.5" of drop available, lol...

Post up a pic when you get them all on. And slam dat shiot, yO!

 

[thejeans]

as promised heres the bandaid to "fix" the damage thanks to a dumb broad talking on her phone

 

[o0n8]

did you put any neosporin on it first? i hear it heals wounds faster with less scarring

 

[thejeans]

hahahaha.... no neosporin, shes hopefully going to be going in for a lil "reconstructive surgery" late summer early fall, but til then she will just rock the bandaid

 

[jri4]

In other news I got the front coilovers installed yesterday. Still playing with the ride heigh - right now about 25" from the ground to the fender or about 1" wheel gap. Still have another 2.5" of drop available, lol...

Post up a pic when you get them all on. And slam dat shiot, yO!

(mswerd)

Please use my previous rant/guide for reference:

8. Two Words: NEEDZ MOAR LOW and NEG CAMBER BABY YEAH!

Edit: Nevermind, forgot you aren't an MS3 owner...Those rules are reserved for "special" people.

 

[magnumP5]

^^^ LOL!

Front are staying where they are now until I get the rears installed. Might take the driver's side down ~1/8" as it's just a little higher than the passenger's side. Hopefully the rears will be going in this weekend.

 

[kamon8404]

Hey stephen, I still have those p5 wheels and covers sitting in my garage. You want me to take them to you sometime?

 

[THE Phen]

Hey stephen, I still have those p5 wheels and covers sitting in my garage. You want me to take them to you sometime?

That's cool man. Do you want the MSP's back?

 

[thejeans]

if not, can i have em... pa pa pawease?? hahaha