Fmic From Ebay Is ON here are the pics!!!
- Thread starter turbo 4
- Start date
hahaha (2thumbs)
(rofl)(rofl2)
It would most likely take more than 5 minutes to remove the front bumper off an MS3/MS6. He was referring to how this whole thread is fake and how it only took him 5 minutes in Photoshop to cut an intercooler off another car and stick it on his speed3.
And the ironic thing? His FMIC looks more real than the OP with his oversized garbage ass core.
Kudos to Strytnyne, that's pretty clean.... I was attempting to do that with my car, and then I forgot I had a PS trial and found out it's already expired
time to go download a full crack off the torrents..... shhhh 
Last edited:
(rofl)(rofl2)
It would most likely take more than 5 minutes to remove the front bumper off an MS3/MS6. He was referring to how this whole thread is fake and how it only took him 5 minutes in Photoshop to cut an intercooler off another car and stick it on his speed3.
And the ironic thing? His FMIC looks more real than the OP with his oversized garbage ass core.
Kudos to Strytnyne, that's pretty clean.... I was attempting to do that with my car, and then I forgot I had a PS trial and found out it's already expired
mininova's got a good one with keygen with tonnes of seeders. just got it last week (dance)
seriously people if u even have to speculate if this is fake or not.. u need to get your eyes checked or somthing, its not even a good photochop.
done this in like 5 minutes
the anal beads look so real. can't tell if it's PS'ed or not.
That's a lame excuse.... sound shouldn't matter, they just want to see video.... even if it's silent, if you can provide video of you circling around the front mount, and showing a view down from the top of the engine.... Sound doesn't matter.... "the only problem is my digital camera has no sound with video" = this s*** is fake and I can't record a video to prove it's "real".
More that reveals this is fake.
What I also want to know is where are the people who swore up and down this garbage was real and couldn't be fake? Where'd they all go? (rofl2)
poor analysis. the first 2 pics are in front of the mustache, the other 2 are behind it therefore hiding the 90 degree bend.
it's real. geez.
It's alot easier to hide a shopped FMIC behind a bumper, than it is to make it stick out like the OP did. Main reason is the number of reflections, and the fact the reflections have more color in them in the OPs pics. That AMS chop is pretty good, except the core itself should be darker since it's hiding behind the bumper, so less light would hit it. Props though, good for 5 minutes!
The other thing is the quality of the OPs pics suck, so it's easy to hide crap that sticks out in bad chops. If they were higher res, better focus, it would be much easier to tell.
The other thing is the quality of the OPs pics suck, so it's easy to hide crap that sticks out in bad chops. If they were higher res, better focus, it would be much easier to tell.
poor analysis. the first 2 pics are in front of the mustache, the other 2 are behind it therefore hiding the 90 degree bend.
it's real. geez.
You know what I love about public forums? People who say "you're wrong" but offer no support to back up their opinion. So I'll kindly cast your post aside to the "dismissed" pile. Look at the bottom lip in both pics. The FMIC isn't moved THAT far back (which you can judge by seeing the amount of the front lip revealed in the pics). Moving it only a few inches would STILL show some of the 90 degree bend. In the 2nd set of pics you see NONE of the 90 degree bend.
Just because he moved the FMIC futher back (even if it was 10 inches) you would still see the 90 bends at least from the front.
In the 2nd set of pics there's no indication the pip even bends 90 degrees.... it's almost as if he's replaced the 90 degree bends with a straight pipe to allow it to be pushed further back.
And because I've just said this it wouldn't surprise me if the OP jumped in at the last 2nd to say that's exactly what he did (doh)
it MIGHT be fake, but i'm saying u analyzed it rather poorly. how can u see the bend WHEN IT IS MOVED BACK? you can clearly see it on the last pic, left pipe is NOT STRAIGHT. (ugh)
Ok what you said now makes better sense, and I was referring to your comment that it's real and not giving an explanation as to why so... Now look at the pic and compare it with the open engine.... if that pipe was a 90 degree bend it wouldn't match up with the pipe that crosses over the top of the engine.
you can also see if you look in the area circled on the last pic, that the image has a distorted color view... and there's no longer a reflection on the pipe, there's a BARE small single spot which appears that it may have a slight "reddish" hue to it. Being that the pipe is polished chrome.... in day light... and not hiding behind the grill or anything, it should have a better reflection on it.
I like the change you did with the front grill.... also looks like you made your wheels/tires bigger too.
Off topic but where did you get those wind deflectors for the windows? I like how they're low profile. Remind me of a local guy around here who has some on his speed3, says he got them from Canada, been trying to find out if they made any for the speed6.
Off topic but where did you get those wind deflectors for the windows? I like how they're low profile. Remind me of a local guy around here who has some on his speed3, says he got them from Canada, been trying to find out if they made any for the speed6.
Yeah that's why I like them, cause they're low profile and they won't stickout/bulge like the ones I've seen for the mazda6/mazdaspeed6.
I dunno, the wheels just looked larger to me is all, looked really nice though, that photoshop you did. lol
[edit]
I just checked the site.... found a low profile version for the Mazda6 sedan... which should fit the MS6.... only catch is $128 bucks compared to $50 from the bulkier ones. But they look so clean and purdy.
Last edited:
paid 133 for mine, to me its worth the money. just adds something to the car just cant explain looks clean =]
mazdaspeed32007
Member
- :
- Mazdaspeed3
what makes it so funny is the fact the front black plastic peice on the bumper in the 1st few pics is cut out to fit the IC. then when its tucked back into the bumper the black piece is perfect. a bit odd. but thats just me. im also pretty savoy with the photoshop and this is hardly hard to accomplish. ill buil you a whole car if you want engine and all. give me a few pics of the motor and outside and ill give you a totally tricked out speed3.
EDIT: its removed not cut....i withdraw my first statement. either way....your FMIC looks like crap.
EDIT: its removed not cut....i withdraw my first statement. either way....your FMIC looks like crap.
Last edited:
